Konstsmide Ground Spot - A++
Best current price£79.90from Lights.co.uk
Best offers
Shopping.co.uk recommended and popular offers
Lights.co.uk£79.90Visit shop Konstsmide Ground Spot Deck Light, Variably Adjustable
Visit shopLights.co.uk£79.90Visit shop One Offer
1 offer from £79.90
View price history by clicking the chart icon.
Product Information
Full details
This robust, drive-over ground spot from Konstsmide is ideal for driveways and outdoor areas where durable, integrated lighting is needed. It offers adjustable beam lighting for paths or features, but requires a separate GU10 bulb and professional installation due to its mains voltage connection.
All features
| Energy Efficiency | A++ |
|---|---|
| Model Part Number | 7857-310 |
| Brand | Konstsmide |
Extended Product Information
FAQs
What type of bulb does this ground spot use?
This ground spot uses a GU10 lamp. The bulb is not included and must be purchased separately.
Can this ground spot be driven over?
Yes, this ground spot is designed to be driven over and can withstand a load of up to 510 kg (5000 Newton).
Is the beam angle adjustable?
Yes, the beam angle is adjustable from 0 to 15 degrees, allowing you to focus the light.
What is the IP rating of this product?
The International Protection (IP) rating is IP65, which means it is protected against dust and low-pressure jets of water.
Does it come with a bulb?
No, the GU10 bulb is not included with the fixture.
Can I install this myself?
Due to the mains voltage (230V AC) and the need for proper sealing, professional electrical installation is highly recommended.
Is the light dimmable?
Yes, the fixture is dimmable, provided you use a dimmable GU10 bulb and a compatible dimmer switch.
Troubleshooting
Spotlight does not turn on.
Verify the mains power supply is active. Check the GU10 bulb is correctly seated in the socket. Ensure the bulb itself is functional; test with a known working bulb. Confirm all wiring connections are secure and correct as per installation guidelines.
Flickering light.
This could indicate a loose bulb connection or an issue with the GU10 bulb. Reseat the bulb firmly. If using a dimmable bulb with a dimmer, ensure compatibility between the bulb and dimmer, or try a different bulb.
Water ingress observed.
Immediately turn off power to the fixture. Inspect the seals and mounting for any damage or gaps. If damage is found, professional repair or replacement of seals may be necessary. Ensure the fixture is installed in a well-draining area.
Reduced brightness.
The GU10 bulb may be nearing the end of its lifespan or may not be of sufficient wattage. Replace the bulb with a new one of appropriate specifications.
Pros and Cons
Pros
- Can be driven over, suitable for driveways.
- Adjustable beam angle for targeted lighting.
- Robust stainless steel and aluminum construction.
- High IP65 rating for weather resistance.
- Energy efficient (A++ when used with appropriate bulb).
Cons
- Requires a separate GU10 bulb purchase.
- Requires professional installation due to mains voltage.
- Beam angle adjustment might be limited for some applications.
- Fixed dimensions may require precise ground preparation.
Setup, Compatibility & Care Instructions
Setup:
This ground spot requires mains voltage (230V AC) and is designed for recessed installation directly into the ground. Professional electrical installation is recommended due to the nature of mains voltage wiring and the requirement for proper sealing to maintain the IP65 rating. Ensure the installation site is prepared to accommodate the spot's dimensions (15cm height, 12cm width, 12cm depth) and allows for a secure, flush finish.
Compatibility:
- Lamp Type: Compatible with one GU10 lamp. A suitable GU10 bulb must be purchased separately. For optimal energy efficiency, consider LED GU10 bulbs. The maximum wattage for the GU10 bulb should not exceed the fixture's rating (check fixture specifications if available, though not explicitly stated in provided data).
- Dimmability: The fixture is dimmable, provided a dimmable GU10 bulb is used and connected to a compatible dimmer switch.
Care:
- Periodically clean the stainless steel surface with a soft, damp cloth. Avoid abrasive cleaners that could scratch the finish.
- Ensure the ground around the spot is well-drained to prevent water pooling, which could compromise the IP65 rating over time.
- Inspect the seal around the fixture periodically to ensure it remains intact.