Kenable Network Cable - Cat 5E - Blue - 2m

FTP stands for Fully Shielded Twisted Pair. It means the cable has an overall shield and individual pairs of wires are also shielded. This is important because it protects the data signal from external electromagnetic interference (EMI), leading to a more stable and reliable connection, especially in electrically noisy environments.

Yes, this Cat 5E cable is backward compatible and will work with devices operating at 10Mbps and 100Mbps. It will simply operate at the maximum speed supported by the slowest device in the connection.

This Cat 5E cable is Gigabit Certified and supports data transfer rates up to 1000Mbps (1 Gbps).

The FTP shielding provides robust protection but can make the cable slightly stiffer and less flexible than standard unshielded twisted pair (UTP) cables. However, the 2-meter length is generally manageable for most setups.

Simply plug the RJ45 connectors on each end of the cable into the Ethernet ports of your network devices, such as a router, switch, or computer.

Warranty information is typically provided by the retailer or manufacturer at the point of sale. Please refer to your purchase details for specific warranty terms.

Verify both ends of the cable are securely plugged into the correct ports. Check if the indicator lights on the network ports are active. Try a different known-working cable to rule out a cable issue. Ensure network devices are powered on.

Ensure the cable is fully seated. Check that the connected devices support Gigabit speeds. If the cable runs near strong sources of interference, ensure the FTP shielding is properly connected and that the cable is not damaged.

Inspect the cable for physical damage (cuts, kinks). Ensure connectors are clean. Test the cable in a different location to see if environmental interference is the cause. Consider upgrading to a higher category cable if speeds consistently exceed Cat 5E capabilities.