Best current price£102.05from Amazon
Shopping.co.uk recommended and popular offers
Amazon£102.05Visit shop Siemens ST70-1200 Digital SM 1223 8 Module Input 8 Output Transistor 0.5A
Visit shop5 offers from £102.05 - £560.27
View price history by clicking the chart icon.
This Siemens SM 1223 digital expansion module is designed for industrial automation engineers and system integrators working with SIMATIC S7-1200 series PLCs. It provides a robust 8 digital inputs and 8 relay outputs, enabling seamless integration of digital signals into control systems. A key benefit is its advanced diagnostics and alarm capabilities, simplifying troubleshooting. However, users should note that the output current rating is limited to 500mA per channel, which may require careful consideration for high-power loads.
| Brand | Siemens |
|---|
The maximum output current for each relay output is 500mA.
No, this module is specifically designed for and compatible only with the Siemens SIMATIC S7-1200 series PLCs.
The module requires a 24VDC power supply, with a permitted voltage range of 20.4V to 28.8V DC.
Yes, it features galvanic isolation between the channels and the backplane bus for enhanced reliability and safety.
The module can operate reliably in ambient temperatures ranging from -20°C to 60°C.
Yes, the digital inputs are configurable for sink or source, and the digital outputs are configurable.
The maximum shielded cable length for digital inputs is 500 meters.
Verify correct physical installation on the S7-1200 rail. Ensure the module is properly seated and has power. Check the configured I/O addresses in the PLC programming software for conflicts or errors.
Confirm the input voltage is within the 0-30V DC range and matches the expected sink/source configuration. Check wiring connections for looseness or incorrect polarity. Test input signals directly with a multimeter.
Ensure the output current does not exceed the 500mA rating. Verify the output voltage is within the permitted range (20.4-28.8V DC for DC outputs). Check PLC program logic controlling the output. Inspect output wiring for damage.
Consult the S7-1200 system manual for specific diagnostic codes related to this module. Common causes include power supply issues, internal faults, or over-temperature conditions. Check the environmental conditions and power stability.
Setup: This module is designed for use with Siemens SIMATIC S7-1200 series PLCs. Ensure the PLC is powered off before installing the module. Slide the module onto the designated rail of the S7-1200 CPU or a preceding expansion module until it clicks into place. Connect the 24VDC power supply to the appropriate terminals. Wire the digital inputs and outputs according to your application requirements, adhering to the specified voltage and current limits. Configure the module's I/O addresses within the S7-1200 programming software.
Compatibility: This module is exclusively compatible with the Siemens SIMATIC S7-1200 PLC series. Refer to the specific S7-1200 CPU documentation for the maximum number of expansion modules supported.
Care: Keep the module clean and free from dust and moisture. Use a dry or slightly damp cloth for cleaning; avoid harsh chemicals or solvents. Ensure adequate ventilation around the module and the PLC system to prevent overheating, especially within the specified operating temperature range of -20°C to 60°C.
