UniBond Mould Resistant Bath & Kitchen Silicone Sealant - White

No, this UniBond sealant comes in a ready-to-use pack with a built-in trigger mechanism, eliminating the need for a separate sealant gun.

The sealant cures quickly. While it sticks in seconds, full curing time depends on ambient conditions, but it's generally designed for a fast return to use.

This product is specifically designed for wet indoor environments such as bathrooms and kitchens. It is not intended for outdoor applications.

Silicone sealants are generally not designed to be painted over. It is best to apply the sealant after painting or to use a paintable sealant if required.

It is suitable for use around baths, basins, showers, toilets, sinks, worktops, and tiled surfaces in wet areas.

Use a sharp knife or a dedicated sealant remover tool to carefully cut and peel away the old sealant. Ensure the surface is clean and dry afterwards.

Unused product should be stored in a cool, dry place. Refer to the packaging for specific expiry date information.

Ensure the safety seal has been fully broken and removed. Check that the trigger mechanism is not obstructed.

Practice applying to a scrap surface. Ensure a consistent, light squeeze on the trigger and maintain the 45° angle. Smooth immediately after application.

The surface may not have been properly cleaned and dried before application. Remove the old sealant and reapply to a completely dry, dust-free surface.

While the sealant is mould-resistant, persistent high humidity and inadequate ventilation can still encourage mould growth. Ensure the room is adequately ventilated. Clean any new mould growth promptly with a mild detergent.