Aquacadabra Algae Master Pond UV 55W

For optimal performance, the UV bulb should be replaced annually, as its UV output degrades over time even if it continues to emit light.

No, the Aquacadabra Algae Master is designed to treat free-floating algae that cause green water. It does not effectively remove string algae or other forms of filamentous algae.

The maximum recommended pond size for the Aquacadabra Algae Master Pond UV 55W is 6,000 gallons (27,000L).

The unit features large ports and includes glue-in hosetails for connecting to 0.5 in, 3/4 in, 1 in, 1.25 in, and 1.5 in flexible pipe. It also fits most standard 1.5 in household solvent weld waste and pressure pipes.

Yes, the Aquacadabra Algae Master comes with a one-year manufacturer guarantee.

Carefully remove the quartz sleeve (refer to the manual for instructions) and clean it with a soft cloth or sponge and water. Avoid abrasive cleaners that could scratch the glass.

The maximum recommended turnover rate for the Aquacadabra Algae Master Pond UV 55W is 4,000 gph (gallons per hour).

Ensure the UV bulb is functioning (a faint glow may be visible). Check that the flow rate does not exceed 4,000 gph. Verify the bulb and quartz sleeve are clean. The unit may be undersized for the pond or there may be other algae sources (e.g., string algae, excess nutrients).

Check for blockages in the inlet or outlet ports. Ensure the UV sleeve and bulb are not fouled. Confirm that the flexible pipe or solvent weld connections are not kinked or restricted.

This is typically not an issue with UV clarifiers. Ensure all connections are secure and that the unit is properly mounted. If the noise persists and is concerning, contact customer support.

Ensure the unit is properly connected to a power source and that the power switch is on. Check the bulb for damage or proper seating. If the bulb is new and still does not light, it may be faulty.