Liquitex Professional Matte Varnish - 3.79lt

Drying times can vary depending on environmental conditions. Refer to the product label for specific drying times, usually 24-72 hours for complete drying.

No, this varnish is specifically designed for acrylic and oil paintings and is not recommended for watercolour paintings.

No, Liquitex Professional Matte Varnish is permanent and non-removable once dry.

You can apply the varnish by brush or spray. For brush application, use long, even strokes. For spray application, use thin, even coats.

This varnish is ready to use, so thinning is usually not necessary. However, if the viscosity is an issue, consider spraying or applying a thinner coat.

One or two thin coats are usually sufficient, but the number of coats depends on the desired level of protection and the surface. Allow each coat to dry completely before applying the next.

Store the varnish in a cool, dry place, away from direct sunlight.

Ensure the artwork and the environment are free of excessive humidity. Apply thin, even coats and avoid over-application.

Use a high-quality brush and apply the varnish in long, even strokes. For a smoother finish, consider using a spray application.

Check the room temperature and humidity. Ensure proper ventilation and allow sufficient drying time. Make sure the paint surface is fully cured before applying the varnish.

Apply thinner coats and avoid applying too much varnish at once. Make sure your surface is level while the varnish dries.