Best current price£55.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£55.90Visit shop VEVOR 5 Pack Acoustic Panels with Self Adhesive, 47.2 x 23.6 x 0.4 inch Sound Proof Foam Panels, Polyester Fiber Soundproof Wall Panels High Density, for Home, Studio, Office, Theater, Black
Visit shop1 offer from £55.90
View price history by clicking the chart icon.
Designed for homeowners, musicians, and office managers, VEVOR Acoustic Wall Panels provide an effective solution for reducing echoes and absorbing mid- to high-frequency noise in any room. These high-density polyester fiber panels offer a professional 0.85 NRC rating, significantly improving sound clarity; however, it is important to note that these are intended for mid-to-high frequency sound absorption and may not fully block low-frequency sound transmission between rooms.
| Model Part Number | LYPB51206 |
|---|---|
| Brand | VEVOR |
No. These panels are designed for acoustic treatment (absorption) rather than soundproofing (blocking). They will reduce internal echo but will not prevent sound from traveling through walls.
The material is E0-rated, meaning it is low in formaldehyde and safe for indoor environments, but please check local building codes if you are installing these in commercial settings that require specific fire-retardant certifications.
The 3M adhesive is very strong. While it works well on standard painted drywall, it may pull paint or texture off the wall if removed forcibly.
It is not recommended to paint the panels, as the paint can clog the pores of the polyester fiber and significantly reduce the acoustic performance.
The panels adhere best to smooth, flat, and sealed surfaces like drywall, wood, glass, or metal. They will not stick well to dusty, uneven, or heavily textured surfaces.
For general echo reduction, covering 20-30% of your wall surface is usually sufficient. For recording studios, prioritize reflection points near your microphones or speakers.
Ensure the wall was clean and dry before installation. If the surface is porous, you may need to apply a thin layer of spray adhesive or a double-sided mounting tape compatible with your wall type.
Use a sharp utility knife with a fresh blade and a long metal straight-edge guide to ensure clean, precise cuts through the polyester fiber.
To ensure the best adhesion, clean your target wall surface thoroughly to remove all dust, grease, and loose debris. Measure your area and plan your layout before peeling the 3M backing, as the adhesive is very strong. When applying, press firmly across the entire surface of the panel to engage the adhesive properly. For maintenance, keep the panels clean by lightly vacuuming them with a soft brush attachment or using a lint roller to remove surface dust. Avoid getting the panels excessively wet or using liquid cleaners, as this may compromise the fiber density.
