Discover the Smeg KSED65XE 60cm Wall Extractor Hood in Stainless Steel. This hood features 3 Speed...Discover the Smeg KSED65XE 60cm Wall Extractor Hood in Stainless Steel. This hood features 3 Speeds for efficient odour removal and bright LED Lighting to illuminate your hob area. It offers the flexibility of ducting out or re-circulating the air, with a 150mm vent outlet. For ducting out, an optional vent kit (SP150 or SP150FLAT) is available. For re-circulating, optional active charcoal filters are required. The hood has an Energy Rating of B and a Noise Rating of 67dB(A). The LED lights are long-lasting, energy-saving, and can be used independently of the fan for ambient lighting.
The Smeg KSED65XE is a 60cm wall-mounted extractor hood designed for home cooks who want to maintain a clean and odor-free kitchen. Its key benefit is effective removal of smoke, grease, and cooking smells with its powerful extraction capabilities and multiple speed settings. Note that the hood requires either ducting to an outside vent or the use of optional charcoal filters for recirculation.
All features
Colour
Silver
Energy Efficiency
B
Model Part Number
KSED65XE
Brand
Smeg
Extended Product Information
FAQs
How often should I clean the grease filter?
It is recommended to clean the grease filter every 1-2 months, depending on your cooking habits.
What type of light bulbs does the hood use?
The hood uses LED light bulbs.
Where can I purchase replacement charcoal filters?
You can purchase replacement charcoal filters from appliance retailers or online.
What is the warranty period for the Smeg KSED65XE?
Warranty information is not available in the provided product data.
Can I install the hood myself?
While the installation can be done by a DIY enthusiast, it's recommended to consult a professional to ensure safety and proper installation, especially if ducting is required.
What is the extraction capacity of the hood?
The maximum extraction power is 635 m³/h.
What are the dimensions of the hood?
The hood is 600mm wide, 652mm high and 514mm deep.
Troubleshooting
Extractor hood is not turning on.
Check the power connection and ensure the power outlet is working. Check the fuse or circuit breaker.
Extractor hood is not extracting effectively.
Check and clean the grease filters. Make sure ducting is properly connected and free of obstructions. If recirculating, check the charcoal filters.
LED lights are not working.
Check the light bulbs and replace them if necessary. Consult the manual on how to change them.
Hood is making excessive noise.
Check the fan blades for any obstructions. Ensure the hood is properly mounted, as loose mountings can cause vibrations and noise. Reduce the fan speed.
Pros and Cons
Pros
Effective at removing cooking odors, smoke, and grease.
Multiple speed settings offer flexibility.
LED lighting provides bright and efficient illumination.
Easy to clean with a removable and washable grease filter.
Offers both ducted and recirculating options.
Cons
Requires either ducting or optional charcoal filters (sold separately) for effective use.
Noise level can reach 67 dB on high speed.
Installation may require professional assistance.
Charcoal filters need to be replaced periodically.
The hood is B rated for energy efficiency.
Setup, Compatibility & Care
Installation: The Smeg KSED65XE is designed for wall mounting. Ensure you have the necessary space and mounting hardware.
Ducting or Recirculation: Decide whether to duct the exhaust outside or recirculate the air. For ducting, connect the vent outlet (150mm) to ducting pipes. For recirculation, you will need to purchase and install the optional charcoal filters.
Electrical Connection: Ensure the hood is connected to a 220-240 V, 50-60 Hz power supply.
Cleaning:
Grease Filter: The aluminium grease filter is washable. Remove it and clean regularly with warm, soapy water.
Exterior: Wipe the stainless steel exterior with a damp cloth and mild detergent. Avoid abrasive cleaners.
LED Lights: These require no special care. They are long-lasting and energy-saving.
Compatibility:
The hood is compatible with most standard kitchen setups. However, ensure you have sufficient space for the hood and its ducting/recirculation components.
Make sure to maintain the minimum distances from the hob as specified in the product documentation.