Gardena Classic Water Hose - 30m - 13mm

The Gardena Classic Hose is designed for standard domestic water pressure. It is not rated for high-pressure applications.

No, this hose is intended for general garden watering and is not suitable for use with pressure washers.

You can clean the exterior of the hose with a damp cloth and mild soap if necessary. Rinse and allow to dry before storing.

While built for outdoor use, prolonged exposure to direct sunlight can degrade the material over time. Storing it out of direct sun when not in use is recommended.

This hose uses standard 1/2-inch (13mm) garden hose connectors, which are widely available.

Yes, you can connect multiple hoses using compatible hose connectors, provided the combined length does not exceed the pressure capabilities of your water source.

Gently unbend the hose. If the kink persists, ensure it is not due to over-tightening of connectors or damage to the hose material. Fully unwind the hose on a flat surface.

Check that the hose connector is securely tightened to the faucet and the watering tool. Ensure the washer inside the connector is present and in good condition.

This is normal for many hose materials. Store the hose indoors during freezing temperatures. Allow the hose to warm up to room temperature before use in cooler conditions.