Kenable Euro Module Cat6 Low Profile Faceplate Socket - 012386
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Kenable Euro Module Cat6 socket is ideal for network installers and home enthusiasts looking to create clean, permanent wall-mounted ethernet connections in standard 86x86mm faceplates. It provides reliable, high-speed Gigabit performance and includes essential features like integrated cable management and dust protection, though it requires a punch-down tool for installation which may not be intuitive for casual DIYers.
All features
| Model Part Number | 012386 |
|---|---|
| Brand | kenable |
Extended Product Information
FAQs
Does this module support T568A and T568B?
Yes, it is designed to support both wiring standards.
Can I use this with Cat5e cable?
Yes, the module is backwards compatible with Cat5e, though performance will be limited to the capability of the cable installed.
Do I need a special tool to install this?
Yes, you will need a Krone-style punch-down tool to terminate the wires correctly.
Is the module shielded?
This model is designed for standard UTP (Unshielded Twisted Pair) Cat6 applications.
How many modules fit in a standard faceplate?
This depends on your faceplate; typically, two modules fit into a standard 86x86mm Euro double-aperture plate.
What is the benefit of the dust shutter?
The shutter prevents dust, lint, and small particles from settling on the internal contacts, which helps maintain a clean, high-quality signal over time.
Troubleshooting
Slow connection speed or packet loss
Check that the wires are properly seated in the IDC pins and verify that the wiring scheme (A or B) matches at both ends of the cable run.
Cable slips out of the module
Ensure the integral cable retention clip is engaged and use the provided cable tie point to secure the outer sheath of the cable.
Difficulty inserting the cable into the IDC
Verify that you are using the correct size wire (22-26 AWG) and that the punch-down tool is compatible with LSA+ style modules.
Pros and Cons
Pros
- Durable, low-profile design fits seamlessly into standard wall plates
- Supports both T568A and T568B wiring standards for versatility
- Integrated dust shutters protect connection points
- Built-in cable retention ensures stable, long-term performance
Cons
- Requires a punch-down tool for termination
- Not intended for tool-less snap-in installation
- May require extra space in shallow back boxes due to module depth
Setup, Compatibility & Care
Installation requires stripping the outer jacket of your Cat6 cable, untwisting the individual pairs, and inserting them into the Krone-style IDC slots according to your chosen wiring scheme. Use a dedicated punch-down tool to seat the wires into the terminals and trim the excess.
- Compatibility: Compatible with 22-26 AWG ethernet cabling. Ensure the faceplate mounting box is deep enough to accommodate the cable bend radius.
- Care: Keep the contact area free of moisture. If the connection becomes intermittent, check that the cable tie is secure and that no wires have been pulled from the IDC pins.
- Environment: Keep away from high-heat sources and ensure cables are routed without sharp bends to maintain network integrity.