Best current price£49.95from Amazon
Shopping.co.uk recommended and popular offers
Amazon£49.95Visit shop Thermilate Technology Magnolia Insopaint Advance Energy Saving Paint Keep Room Warm | 5L In 24 Colours | Tough Acrylic Emulsion Wall Ceiling Paint | Interior Emulsion
Visit shop21 offers from £49.95 - £98.10
View price history by clicking the chart icon.
InsOpaint Interior Emulsion Paint by THERMILATE TECHNOLOGIES is designed for homeowners and building managers seeking to improve interior climate control and reduce condensation. Its key benefit is superior thermal insulation and breathability, which dramatically helps in eliminating condensation problems. A potential caveat is that maximum thermal insulation requires a minimum of two coats.
| Brand | Thermilate Technologies |
|---|
A minimum of two coats is recommended to achieve maximum thermal insulation and condensation reduction benefits. Additional coats may be applied for enhanced coverage or durability.
InsOpaint is designed for interior walls and ceilings. It is generally compatible with most standard surfaces, but it is always advisable to test on a small area first, especially on previously painted surfaces or unusual materials.
Drying times can vary based on environmental conditions (temperature and humidity). Refer to the product's specific instructions for recommended drying times between coats, but typically allow several hours.
InsOpaint features very low VOC levels, which means it has a minimal odor compared to many conventional paints, contributing to better indoor air quality during and after application.
Yes, InsOpaint typically provides a good surface for repainting with standard water-based or emulsion paints after it has fully dried and cured. Always ensure proper surface preparation before applying subsequent coats.
InsOpaint offers superior thermal insulation and breathability properties that standard emulsions do not possess, specifically targeting condensation and temperature regulation issues. It also boasts low VOCs and a premium finish.
Ensure the surface was properly prepared, clean, and dry before application. Check for incompatible primers or contaminants on the surface.
Verify that a minimum of two coats were applied evenly. Ensure adequate ventilation in the room, as paint alone cannot solve issues caused by severe, persistent moisture or lack of airflow.
Apply paint with consistent pressure and technique. Work in manageable sections and maintain a wet edge to avoid lap marks. Ensure the paint is adequately stirred before and during use.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and peeling paint. Prime bare plaster or porous surfaces with a suitable primer if necessary.
Application: Apply a minimum of two coats using a brush, roller, or spray. Allow adequate drying time between coats as per manufacturer recommendations. For optimal thermal insulation, ensure even coverage.
Compatibility: InsOpaint is an acrylic emulsion designed for interior walls and ceilings. It is compatible with most standard interior surfaces. Test on a small, inconspicuous area if unsure.
Care: Clean application tools immediately after use with water. For maintaining painted surfaces, use a soft, damp cloth to wipe away dirt. Avoid abrasive cleaners that could damage the finish.
