Best current price£23.60from eBay
Shopping.co.uk recommended and popular offers
eBay£23.60Visit shop Varilight MFP1M1 Dimmer Modules 1-10V 2W Dimmer Module for multiple HF Ballasts
Visit shop
The Range£25.47Visit shop Varilight Dimmer Module 1X2way 1-10V 2-Way Replacement Dimmer Module For Multiple Hf Ballasts/Led Dr - Georgian Brass
Visit shop6 offers from £23.60 - £29.01
View price history by clicking the chart icon.
This Varilight Dimmer Module (MFP1M1) is designed for users needing precise lighting control in 2-way switching setups. Its key benefit is enabling dimmable functionality for compatible lighting systems via a 1-10V DC input. A caveat is its requirement for a specific input voltage, making it unsuitable for standard 230V systems without an intermediary controller.
| Model Part Number | MFP1M1 |
|---|---|
| Brand | Varilight |
This module is designed for lighting systems that accept a 1-10V DC input for dimming control. This typically includes compatible electronic ballasts and LED drivers.
Only if the LED bulbs are specifically designed to be dimmable via a 1-10V DC control signal and are used with a compatible driver. It will not work with standard mains voltage LED bulbs.
It means the dimmer module can be part of a circuit where the lights can be controlled (turned on/off and dimmed) from two separate locations, typically using two standard light switches in conjunction with the module.
Yes, a dedicated 1-10V DC power supply or a control system output that provides this voltage is required to operate the dimmer module.
No, this is a dimmer module that requires integration into a compatible lighting system and wiring circuit, specifically one that uses a 1-10V DC control signal.
Please refer to the product packaging or the manufacturer's official documentation for warranty information, as it is not specified in the provided product data.
Verify that the connected lighting fixture and driver are compatible with 1-10V DC dimming and are correctly wired to the module. Ensure the 1-10V DC input signal is present and within the operational range.
Check all power and control wiring connections to the module. Ensure the 1-10V DC power supply is functioning correctly.
This can indicate an incompatible ballast/driver or a weak 1-10V DC signal. Try a different compatible fixture or ensure the control signal is stable.
Confirm the 2-way wiring configuration is correctly implemented according to standard 2-way switching principles, ensuring the dimmer module is integrated appropriately within the circuit.
Setup: Installation requires wiring the module into a 2-way switching circuit. Connect the 1-10V DC control input to the appropriate terminals on the dimmer module and the corresponding output from your control system or power supply. Ensure all connections are secure and adhere to local electrical codes.
Compatibility: This module is specifically designed for 1-10V DC dimmable lighting systems. It is compatible with lighting fixtures, electronic ballasts, or LED drivers that support 1-10V dimming control. It is *not* compatible with standard 230V mains voltage loads directly.
Care: Keep the module clean and dry. Avoid exposing it to excessive moisture or dust. Regular checks of wiring connections are recommended to ensure continued safe operation. Cleaning should be done with a dry or slightly damp cloth; ensure power is disconnected before cleaning.
