Milwaukee Wood Flat Boring Bit Set - 8 Piece - 12-32mm

These bits are designed for use with natural hard and softwood, as well as chipboard.

The hex shank allows for direct insertion into power tools and provides a secure grip in the chuck, preventing slippage.

Select the bit size based on the diameter of the hole you need to drill. The set includes sizes from 12mm to 32mm.

Yes, these bits are compatible with both power drills and drill presses.

Sharpen the bit using a file or grinding tool. If the bit is severely worn, replace it.

Store the bits in the provided plastic carry case to protect them and keep them organized.

The optimal speed depends on the wood type and bit size. Start with a lower speed and increase as needed, always monitoring the cutting action.

Warranty information is not available in the product data.

Check if the bit is dull and needs sharpening or replacing. Ensure correct speed and pressure are being used.

Reduce the drill speed and ensure the bit is sharp. Support the wood on the back to prevent splintering.

Reduce pressure and clear the hole of wood chips by retracting the bit periodically. Try drilling in reverse for a short period to help remove debris.