Crown 10L Matt Emulsion Paint - Magnolia - Beige

The paint is touch-dry in approximately 2 hours. However, allow for at least 4 hours between coats, and a full 24 hours for complete drying.

This paint is designed for walls and ceilings. For wood, you should use a paint specifically formulated for wood surfaces.

Coverage depends on the surface. A 10L can typically covers up to 130 square meters, but this can vary. Calculate the area of your walls and ceilings to estimate the amount you will need.

This paint offers a matt, non-reflective finish.

While the paint is durable, it is not designed to be heavily scrubbed. Clean any marks with a damp cloth.

Seal the can tightly and store it in a cool, dry place, away from direct sunlight and extreme temperatures.

Ensure proper ventilation, avoid contact with skin and eyes. If painting indoors, keep the room well-ventilated, and wear appropriate safety gear like gloves and eye protection.

Ensure thorough stirring of the paint before application. Apply a second coat, and make sure your roller or brush is loaded evenly.

Make sure you're applying the paint to a properly prepared surface, using a primer if needed, and applying two coats of paint.

Ensure adequate ventilation in the room and check the humidity levels. High humidity can slow down drying times. Check the temperature of the room. Ideally, it should be between 10°C and 30°C.