Vallejo Model Colour - Prussian Blue - 18ml

Yes, but it requires thinning with Vallejo thinner and the addition of a flow improver to prevent clogging and ensure a smooth finish.

Clean your brushes immediately with water and, if necessary, a brush cleaner designed for acrylic paints.

Use Vallejo paint thinner or distilled water. Add a few drops at a time until you achieve the desired consistency.

Priming is recommended for optimal adhesion and a more even finish. Vallejo primers are a good choice.

The paint dries quickly to the touch, usually within minutes. Allow a few hours for it to fully cure before handling.

Vallejo Model Colour is suitable for metal, plastic, resin, steel and white metal.

Each bottle contains 17 ml of paint.

No, it is a water-based acrylic paint and does not contain solvents.

Ensure the bottle is sealed tightly. If the paint is slightly dry, add a few drops of Vallejo thinner or distilled water and mix well.

Make sure the model is properly primed and cleaned before applying the paint. For better adhesion, lightly sand the surface before priming.

Apply the paint in thin, even coats. Thin the paint if needed. Use a high-quality brush for smoother application.

Ensure you are using the matte finish paint. If it still appears glossy, apply a matte varnish after the paint has fully dried.