Two Fussy Blokes Semi Smooth Roller Sleeve - 14 Inch

This 10mm nap roller is ideal for medium to large surfaces and works well on semi-smooth to rough textures like plaster walls, ceilings, weatherboards, brick walls, and fences.

No, this roller sleeve is designed specifically for use with all water-based paints only. Using oil-based paints may damage the microfibre material.

Before the first use, wash the roller sleeve in clean water, squeeze out excess water, and let it dry. This removes any loose fibres. Ensure it is fully loaded with paint during application.

Rinse thoroughly with clean water immediately after use until all paint is removed. Gently squeeze out excess water and hang to dry in a well-ventilated area. Do not use solvents.

A shorter nap roller is typically used for smoother surfaces to achieve a very fine finish, while this 10mm nap roller is more versatile for slightly textured surfaces and provides better paint pick-up and coverage.

With proper care and cleaning, this premium microfibre roller sleeve is designed for durability and can be used for multiple projects. Longevity depends on usage frequency and maintenance.

Ensure the roller sleeve is fully saturated with paint and that you are applying consistent pressure. Check that the surface is clean and free from debris. For very textured surfaces, ensure paint is being applied evenly into crevices.

Wash the roller sleeve thoroughly before first use and after every subsequent use. Ensure it is completely dry before storing. If shedding persists, the sleeve may be nearing the end of its usable life or may have been damaged by incompatible paint.

Check that the paint is adequately stirred and at the correct consistency. Ensure the roller sleeve is not dry; it should be consistently loaded with paint.

Rinse immediately after use with warm water. If paint has dried, soak the sleeve in clean water for a short period before rinsing again. Avoid using solvents.