Ecotile Garage Floor Tiles - Blue

No, Ecotile tiles use an interlocking system and are designed to be tapped into place with a rubber mallet. No glue or adhesives are required for installation.

Yes, these tiles create a barrier that eliminates dust, cold, and damp from concrete floors. They are suitable for laying over concrete.

The tiles are 7mm thick. Their dimensions are 497mm x 497mm.

While individual tiles are the units of sale, they are often discussed and priced based on coverage per square meter due to their standard dimensions and weight.

Yes, the tiles have a textured surface and are rated for slip resistance with an R10 rating.

Absolutely. The interlocking design allows the tiles to be easily lifted, disassembled, moved, and reinstalled in a new location.

The tiles have a fire rating of Class Bfl S1.

Ensure the interlocking tabs are clean and free from debris. Check that you are tapping the tiles firmly with a rubber mallet to ensure a tight seam. Verify that the adjacent tiles are correctly oriented.

This can happen if tiles are not fully tapped into place. Go over the floor with a rubber mallet, focusing on the seams, to ensure each tile is fully engaged with its neighbors.

The subfloor may be uneven. While Ecotiles can handle some minor undulations, significant unevenness may need to be addressed before installation. Ensure all tiles are fully seated by tapping with a rubber mallet.

Use a sharp, high-quality utility knife or a jigsaw. Score the tile multiple times with the utility knife for cleaner cuts. Ensure the tile is well-supported during cutting.