Manor Bow Top Single Gate - Black - 914mm x 1943mm

The given width of 914mm refers to the post-to-post gap the gate is designed to fit. The gate itself will be narrower than this gap to allow space for hinges and the latch mechanism.

No, the Manor Bow Top Single Gate is supplied without hinges and a latch. These essential hardware components need to be purchased separately.

The gate is constructed from solid steel, featuring 25mm x 10mm frame and 12mm diameter infill bars.

The total height to the top of the balls (finials) is 1943mm. The height of the shoulder frame is 1770mm.

This gate is designed as a single garden or pathway gate and is typically suited for pedestrian access. It may not be wide or strong enough for driveway use.

Clean with a damp cloth and mild soap if necessary. Avoid abrasive cleaners. Touch up any chips or scratches with appropriate exterior metal paint to prevent rust.

Warranty information is typically provided by the retailer. Please check the product packaging or the retailer's website for specific warranty details.

Check that hinges are correctly aligned and not overly tightened. Ensure there are no obstructions in the swing path. Verify the gate posts are plumb and secure.

Adjust the position of the latch striker plate or the latch bolt. Ensure the gate is hanging correctly and not sagging.

Clean the affected area with a wire brush. Apply a rust converter followed by a coat of black metal paint suitable for exterior use to protect the steel.

Ensure all hinge and latch hardware is securely fastened. Check that the gate posts are firmly set in the ground and not leaning.