Expamet Internal Plaster Stop Bead - 3000mm x 10mm x 0.40mm

Name: Expamet Internal Plaster Stop Bead - 3000mm x 10mm x 0.40mm
Brand: Expamet
SKU: t24n7lphsb
Price: 6.06 GBP
Availability: InStock

Expamet 10mm Plaster Stop Bead 3000mm, manufactured from 0.4mm Galvanised Steel. This bead is used...

Best current price£6.06from Travis Perkins

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Travis Perkins£6.06Visit shop

Expamet Internal Plaster Stop Bead 3000mm x 10mm x 0.40mm

Visit shop

One Offer

1 offer from £6.06

View price history by clicking the chart icon.

Travis PerkinsExpamet Internal Plaster Stop Bead 3000mm x 10mm x 0.40mm

£30.00 delivery

£6.06

Visit shop

Product Information

Full details

This guide is designed for builders and DIY enthusiasts using the Expamet 10mm Plaster Stop Bead. It helps achieve clean, defined edges for plasterwork at openings and abutments. Note that this guide applies specifically to the 3000mm x 10mm x 0.40mm galvanised steel variant.

All features

Brand	Expamet

Extended Product Information

FAQs

What is the purpose of the Expamet Plaster Stop Bead?

It provides a clean, straight edge for plasterwork at openings and abutments.

What material is the Expamet Plaster Stop Bead made from?

It is made from 0.4mm galvanised steel.

What tools are needed to install the Expamet Plaster Stop Bead?

You will need tin snips or a similar cutting tool, and tools for fixing the bead in place such as a hammer or screw driver.

How do I cut the Expamet Plaster Stop Bead?

Use tin snips or a similar metal cutting tool. Always take care when cutting metal.

Can I use this bead with any type of plaster?

Yes, it's compatible with standard plastering materials.

How do I fix the bead in place?

You can fix it in place using plaster or mechanical fixings, such as nails or screws.

How do I clean the Expamet Plaster Stop Bead?

Wipe it down with a damp cloth if it gets dirty. Avoid using abrasive cleaners.

What is the length of this Expamet Plaster Stop Bead?

This specific Expamet Plaster Stop Bead is 3000mm (3 meters) long.

Troubleshooting

Bead is not straight after installation.

Ensure the surface is level and the bead is properly aligned before fixing. Re-check the installation and make adjustments as needed.

Plaster is cracking at the edges.

Make sure the bead is securely fixed and that the plaster covers the bead adequately. Also, check for any movement in the underlying structure.

Difficult to cut the bead.

Use sharp tin snips or a similar tool designed for cutting metal. Consider using protective gloves.

Pros and Cons

Pros

Provides a straight edge for plastering.
Made from durable galvanised steel.
Easy to install.
Helps to prevent cracking at edges.

Cons

Requires careful measurement and cutting.
Can be susceptible to damage if not handled carefully during installation.
May require additional tools for cutting and fixing.
The galvanised coating can be scratched if not handled with care.

Setup, Compatibility & Care

Preparation: Ensure the surface is clean and free from debris.
Cutting: Cut the Expamet bead to the required length using tin snips or a similar tool.
Placement: Position the bead at the edge of the opening or abutment.
Fixing: Secure the bead in place using plaster or mechanical fixings (e.g., nails or screws).
Plastering: Apply plaster, ensuring it covers the bead and creates a smooth finish.
Compatibility: This product is compatible with standard plastering materials and techniques.
Care: Avoid excessive force during installation to prevent damage. Protect the bead from impact during the plastering process. In case of damage, repair or replace the affected section.