Best current price£182.50from eBay
Shopping.co.uk recommended and popular offers
eBay£182.50Visit shop Sealey Blind Bearing Puller Set 9 Piece Bearing Pullers Work Tools AK716
Visit shopeBay£185.16Visit shop Sealey Blind Bearing Puller Set 9 Piece Bearing Pullers Work Tools AK716
Visit shop
B&Q£201.86Visit shop - Sealey Blind Bearing Puller Set 12Pc Ak716
Visit shop19 offers from £182.50 - £238.70
View price history by clicking the chart icon.
This 12-piece Sealey Blind Bearing Puller Set (AK716) is designed for mechanics and DIY enthusiasts who need to remove stubborn blind bearings without damaging surrounding components. Its key benefit lies in the gentle, controlled extraction provided by the slide hammer and screw-type extractor. A potential caveat is that proper technique is required to avoid excessive force on delicate parts.
| Model Part Number | AK716 |
|---|---|
| Brand | Sealey |
A blind bearing is a bearing that is located in a housing or bore where there is no access to the back of the bearing's outer race, making it difficult to remove with standard pullers.
The slide hammer is used to deliver controlled, sharp impacts to the extractor shaft, which in turn pulls the bearing out of its housing. It provides a more effective and often less damaging method than simply prying.
Select the collet that fits snugly inside the inner diameter of the bearing you need to remove. The collet needs to grip the internal surface of the bearing to pull it out effectively.
No, this set is specifically designed for *blind* bearings, meaning bearings that are recessed into a housing. It pulls the bearing from the inside out.
The set includes collets with internal capacities ranging from 8mm up to 34mm.
Yes, this 12-piece set is built with durability in mind and is suitable for professional automotive and machinery repair.
Keep the tool clean and dry after use. Lightly oil the metal components, especially the screw thread, and store it in its case to protect it from damage and loss.
Ensure you have selected the correct collet size for the bearing's inner diameter. Try a slightly larger collet if the current one is loose, or ensure the collet is fully expanded against the inner race.
Ensure the slide hammer is properly assembled and the shaft is clean. Check that the collet is firmly engaged with the bearing. For extremely seized bearings, consider using a penetrating lubricant and allowing it time to work before attempting extraction again.
Loosen the screw on the bridge extractor. If stuck, apply a small amount of penetrating oil to the screw mechanism and gently work it back and forth.
Setup:
Compatibility: This set is designed for blind bearings with internal diameters ranging from 8mm to 34mm. Always ensure the collet has a firm grip on the inner diameter of the bearing before operating the slide hammer.
Care:
