Diall M8 Gate Shield Anchor - Silver
Best current price£3.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£3.00Visit shop B&Q - M8 Hardened Steel Zinc-Plated Gate Shield Anchor (L)65mmPack Of 4
Visit shopB&Q£3.00Visit shop One Offer
1 offer from £3.00
View price history by clicking the chart icon.
B&QB&Q - M8 Hardened Steel Zinc-Plated Gate Shield Anchor (L)65mmPack Of 4
Free delivery in 1–3 days
£3.00
Visit shop
Product Information
Full details
This Diall M8 Gate Shield Anchor set is designed for users needing to secure heavy-duty fixings in concrete and brick. Its key benefit is providing exceptional hold for demanding applications like garden gates, offering robust performance and long-lasting durability. A potential caveat is that it requires specific installation procedures for optimal performance. Key features include hardened steel construction, zinc plating for corrosion resistance, and an M8 size for substantial load-bearing.
All features
| Colour | Silver |
|---|---|
| Model Part Number | M8 |
| Brand | Diall |
Extended Product Information
FAQs
What is the primary use for these anchors?
These M8 gate shield anchors are primarily designed for securing heavy-duty fixings in concrete and brick, such as garden gates, pergolas, and other structural elements that require a robust hold.
What size drill bit do I need?
The exact drill bit size required depends on the specific substrate and the anchor's precise dimensions. Always refer to the product packaging or manufacturer's recommendations for the correct drill bit diameter for an M8 shield anchor.
Can these anchors be used in hollow walls?
No, shield anchors are designed for solid substrates like concrete and brick. They rely on expansion within a dense material and are not suitable for hollow walls or materials where expansion is not possible.
Are bolts included with the anchors?
Typically, shield anchors are sold separately from the bolts or screws. You will need to provide your own M8 bolts or screws of the appropriate length for your application.
How do I remove a shield anchor?
Removing a shield anchor can be difficult as it is designed for a permanent fix. You may need to cut off the bolt head and attempt to drive the anchor further into the substrate or carefully drill it out.
What does the zinc plating do?
The zinc plating provides a protective layer that resists corrosion and rust, making the anchors suitable for use in outdoor environments where they may be exposed to moisture and the elements.
Can I use these anchors for structural load-bearing applications?
These anchors provide a strong fixing, but for critical structural applications, it is always recommended to consult with a qualified engineer to ensure the chosen anchors and fixings meet all safety and load requirements.
Troubleshooting
Anchor does not expand properly
Ensure the drilled hole is the correct diameter and depth for the anchor. Verify the substrate is solid and dense enough for expansion. Make sure the bolt is tightened sufficiently.
Anchor spins in the hole before tightening
The hole may be too large or not deep enough. Try using a slightly smaller drill bit or ensure the hole is drilled to the recommended depth. Clear debris from the hole.
Corrosion observed on the anchor
While zinc plating offers protection, excessive moisture or exposure to corrosive elements can lead to rust. Clean the affected area and consider applying a protective coating if it is a recurring issue in a harsh environment.
Pros and Cons
Pros
- Provides a very strong and secure fixing in concrete and brick.
- Durable construction ensures longevity, even in exposed environments.
- Corrosion-resistant due to zinc plating, suitable for outdoor use.
- M8 size is appropriate for securing heavy-duty items.
Cons
- Requires drilling a precise hole size for proper expansion.
- Installation can be more involved than lighter-duty fixings.
- Primarily suitable for solid substrates like concrete and brick; not for hollow materials.
Setup, Compatibility & Care
Setup:
- Determine the required fixing point and mark its location.
- Drill a hole in the concrete or brick substrate using a masonry drill bit of the correct diameter for an M8 shield anchor (refer to packaging for exact bit size).
- Ensure the drilled hole is clean and free from dust and debris.
- Insert the shield anchor into the drilled hole until the flange sits flush with the surface.
- Insert the bolt or screw through the item to be fixed and into the shield anchor.
- Tighten the bolt or screw. As it's tightened, the shield will expand within the substrate, creating a secure grip.
Compatibility:
- Substrates: Best suited for solid concrete, brick, and similar dense masonry materials.
- Fasteners: Designed to work with M8 bolts or screws (not typically supplied with the anchor itself).
Care:
- The zinc plating provides good corrosion resistance. However, for prolonged exposure in highly aggressive environments, periodic inspection for any signs of wear or corrosion is recommended.
- Ensure fixings remain tight over time, especially in applications subject to vibration or movement.