Stonecare4U Colour Boost All Stone Sealer 5L - Grey
Give your outdoor stone a boost with Colour Boost All Stone Sealer. This professional-grade sealan...Give your outdoor stone a boost with Colour Boost All Stone Sealer. This professional-grade sealant creates a long-lasting shield against stains and dirt, enhancing your stone's natural beauty and colors. It works on most exterior natural stone surfaces, including limestone, slate, and granite, but is not suitable for Kandla Grey (mid & light grey) sandstone or non-porous surfaces. For application, ensure the stone is completely dry (at least 72 hours of dry weather) and the temperature is between 15°C and 23°C. Apply using a low-pressure sprayer, roller, natural fibre brush, or sponge without diluting. Remove any excess sealer after 20-30 minutes. A second coat can be applied 45-60 minutes later. The stone must remain dry during the 72-hour curing process to prevent white patches. Note that this sealer will change the stone's colour and appearance, so always test in an inconspicuous area first. Protect unsealed areas with masking material. Post-sealing care involves using a mild, pH-neutral cleaner. Coverage varies by stone porosity, typically 4-6 sq m per litre on textured surfaces and up to 15 sq m per litre on smooth surfaces.
Stonecare4U Colour Boost All Stone Sealer 5LFree delivery in 1–3 days£56.95Visit shop →
StoneCare4U Essential Colour Boost All Stone Sealer 25LFree delivery in 1–3 days£194.00Visit shop →
StoneCare4U Essential Colour Boost All Stone Sealer 25L - Enhances Natural Colour, Protects Against StainsFree delivery in 1–3 days£194.00Visit shop →
Product Information
Full details
Give your outdoor stone a boost with Colour Boost All Stone Sealer. This professional-grade sealant creates a long-lasting shield against stains and dirt, enhancing your stone's natural beauty and colors. It works on most exterior natural stone surfaces, including limestone, slate, and granite, but is not suitable for Kandla Grey (mid & light grey) sandstone or non-porous surfaces. For application, ensure the stone is completely dry (at least 72 hours of dry weather) and the temperature is between 15°C and 23°C. Apply using a low-pressure sprayer, roller, natural fibre brush, or sponge without diluting. Remove any excess sealer after 20-30 minutes. A second coat can be applied 45-60 minutes later. The stone must remain dry during the 72-hour curing process to prevent white patches. Note that this sealer will change the stone's colour and appearance, so always test in an inconspicuous area first. Protect unsealed areas with masking material. Post-sealing care involves using a mild, pH-neutral cleaner. Coverage varies by stone porosity, typically 4-6 sq m per litre on textured surfaces and up to 15 sq m per litre on smooth surfaces.