Waterpik Cordless Pulse Water Flosser - 2 Pressure Settings

For optimal results, it is recommended to use your Waterpik water flosser at least once a day, ideally after brushing your teeth.

Yes, you can add a small amount of mouthwash to the water reservoir. However, always rinse the unit thoroughly by running a full reservoir of clean water through it after using anything other than water to prevent clogging and buildup.

Info needed: [Specific battery life/usage time per charge. General guidance suggests several days to a week of typical use, but exact hours or uses are product-specific.]

Flosser tips can be rinsed under warm water. For a deeper clean, you can soak them in a mixture of white vinegar and water. Remember to replace tips every 3-6 months for hygiene and effectiveness.

Yes, this model is designed to be waterproof, making it safe for use in the shower.

The Waterpik Cordless Pulse Water Flosser comes with a two-year limited warranty.

If you are a first-time user or have sensitive gums, start with the 'Low' pressure setting. As your gums become accustomed to water flossing, you can gradually switch to the 'High' setting for more intensive cleaning.

Ensure the unit is fully charged. Connect the USB charging cable and allow sufficient time for charging. If the issue persists, try a different power source for the USB cable.

Check that the water reservoir is filled sufficiently and securely attached. Ensure the flosser tip is firmly clicked into place. If using a low charge, the pressure may be reduced; try charging the unit.

Verify that the removable water reservoir is correctly and securely seated on the main unit. Ensure the reservoir cap is tightly closed.

Ensure the unit is fully charged before each use. Over time, battery performance can degrade; however, ensure you are not leaving it discharged for extended periods. Info needed: [Expected battery life per charge].

Ensure you are using the correct technique: aim the water flow at the gumline and between teeth. Try the 'High' pressure setting if the 'Low' setting is insufficient. Confirm the flosser tip is not clogged and is clean.