Polycell Polyfilla - White

It is suitable for use on most common building materials, including wood, plaster, and masonry. Always ensure the surface is clean and dry before application.

Yes, Polycell Flexible Gap Polyfilla is suitable for both indoor and outdoor use. It is designed to withstand the elements.

The filler typically dries within 24 hours. However, drying times may vary depending on environmental conditions like humidity and temperature.

Wipe off any excess filler before it dries. Clean tools with warm water immediately after use.

Yes, you can paint over the filler once it is fully dry (at least 24 hours). Use high quality paint to avoid cracks.

You will need a skeleton gun (caulking gun) to apply the filler.

The amount of filler needed depends on the size and number of gaps you need to fill. A 290ml cartridge should be sufficient for a moderate amount of work. The specific yield will depend on the width and depth of the gaps.

Ensure the plunger in the skeleton gun is properly engaged. Check the nozzle for blockages and clear if necessary. Make sure the trigger is being pressed completely.

Ensure the surfaces are clean and free from any loose material before application. Ensure you are using the correct filler for the application. Ensure the filler is fully dry before painting. Use high-quality paint to avoid cracks.