Plasplugs Solid Wall Super Grips - Brown

The Brown Super Grips are specifically designed for use in solid walls such as concrete and brick.

The Brown variant is suitable for heavy-duty applications and accepts screws ranging from No. 8 to No. 14 (4.5mm to 7mm).

No, these Super Grips are only suitable for solid wall materials like concrete and brick. They will not provide adequate support in hollow walls.

Drill an appropriately sized hole, insert the Super Grip until flush, and then drive in the correct gauge screw. The plug expands to create a tight grip.

The colors typically denote different sizes and load capacities. The Brown variant is the heavy-duty option for larger screws in solid walls.

A hammer may be useful for tapping the plug fully into the hole, but the primary insertion relies on driving the screw.

Ensure the hole was drilled to the correct size and depth for the specific Super Grip. Verify the wall material is indeed solid concrete or brick. Check that the screw size is within the recommended range (No. 8-14 for Brown).

The hole may be too small, or excessive force was used. Ensure the correct drill bit size is used and insert the Super Grip with firm, steady pressure. Do not force it if resistance is too high; re-drill the hole slightly larger if necessary.

The hole may be too large, or the Super Grip is not fully seated. Ensure the Super Grip is flush with the wall surface. If the hole is oversized, try a slightly larger appropriate Super Grip or consider an alternative fixing method.