Kenable Network Cable - CAT6 - 10M

LSZH stands for Low Smoke Zero Halogen. This means the cable jacket is designed to emit minimal smoke and no toxic halogens when exposed to fire, making it safer for use in enclosed public spaces.

This cable is designed for indoor use. Exposure to outdoor elements like UV radiation and moisture can degrade the LSZH jacket and internal wiring, affecting performance and safety.

Yes, the cable is backward compatible. It will work with slower networks, but it will operate at the maximum speed supported by the slowest device or network segment (e.g., 100 Mbps).

Cat6 cables support higher frequencies (up to 250 MHz) and are designed for Gigabit Ethernet (1000 Mbps) with stricter specifications for crosstalk and system noise compared to Cat5e, which typically supports up to 100 MHz.

Shielding (FTP - Foiled Twisted Pair) helps protect the data signal from electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause data errors and slow down your connection, especially in environments with many electronic devices.

Snagless boots prevent the RJ45 connector's locking tab from catching on obstructions during installation or removal. This significantly reduces the risk of breaking the tab, which is a common point of failure for network cables.

AWG stands for American Wire Gauge. A lower AWG number indicates a thicker wire. 26AWG is a standard size for Cat6 patch cables, providing a good balance between conductivity, flexibility, and cost. Higher quality cables might use thicker 24AWG conductors.

Ensure both connected devices support Gigabit Ethernet and that the cable is fully seated in the ports. Verify that no other Cat5e cables are being used in the critical path, as they may limit speeds. Check for interference from other electrical devices.

Check the cable for physical damage, such as kinks or cuts. Ensure the RJ45 connectors are securely plugged in. Try a different port on your network equipment. Test with another known-good cable if possible.

Verify that you are attempting to connect an RJ45 connector into a compatible Ethernet port. Ensure no debris is obstructing the port or the connector.