Sheet Metal Rod Folder Bender - 760 mm, 17 Gauge

This folder is designed to bend steel sheet up to 17 gauge, which is approximately 1.4mm thick.

Yes, you will need to purchase self-locking pliers or suitable clamps separately to secure the pressing plate for operation.

It is designed for bench mounting, so it requires a stable workbench or similar sturdy surface for secure installation using the provided mounting plates.

The working width of this Sheet Metal Rod Folder Bender is 760 mm, which is equivalent to 30 inches.

While primarily rated for steel, it may be able to bend softer metals like aluminum or brass within its gauge limitations. However, testing on a scrap piece is recommended.

After use, wipe the folding surfaces with a dry cloth. Periodically apply a light coat of oil to the moving parts and store the tool in a dry environment.

This Sheet Metal Rod Folder Bender is manufactured by Dirty Pro Tools.

Ensure the sheet metal is securely clamped and that you are applying even pressure. Verify the material is within the 17 gauge limit. Check that the folding edges are clean and free from debris.

Re-check that the folder is securely bolted to the workbench. Ensure the workbench itself is stable and not wobbling.

Confirm that appropriate self-locking pliers or clamps are being used and are securely fastened to hold the pressing plate in position during the bend.