Cartridge Filter Kit - SPARES2GO

It is recommended to clean the filters after each use and replace them every 3-6 months, or sooner if performance degrades or they appear damaged.

While you can tap the cartridge filter to remove loose dust, it is generally not designed to be washed. Washing can damage the filter media. The foam sleeve, however, can be rinsed with water.

The foam sleeve primarily filters liquids, preventing water and sludge from reaching and damaging the vacuum cleaner's motor during wet pick-up tasks.

This specific filter kit is designed for compatible Mac Allister models (CLMWDTOV, CODWDTOV, CODWSTOV). It is not intended for use with other brands or vacuum models.

Over time, clogged filters will reduce suction power. Furthermore, a damaged or missing foam sleeve can lead to liquid entering the motor, causing permanent damage and potentially a fire hazard.

While it captures fine dust, this filter is not typically rated for hazardous materials. For such applications, specialized filters and safety protocols are required.

Check if the cartridge filter and foam sleeve are clogged. Clean or replace them as needed. Ensure the filter is correctly seated and sealed.

Verify that the cartridge filter is properly installed and undamaged. Ensure all seals are intact and the collection tank is securely closed.

Immediately turn off and unplug the vacuum. Check if the foam sleeve is present and properly fitted. If the motor has been compromised by liquid, professional service may be required.

Confirm that you have the correct filter kit for your specific Mac Allister vacuum model. Re-check the installation instructions to ensure you are fitting it according to the design.