Best current price£1.99from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£1.99Visit shop Draper 09067 Multi Construction TCT Drill Bit, 5.0 x 85mm - 09067
Visit shop
B&Q£5.35Visit shop B&Q - Multi Construction Tct Drill Bit5.0 X 85mm 09067
Visit shop28 offers from £1.99 - £8.25
View price history by clicking the chart icon.
The Draper Multi Construction TCT Drill Bit is designed for tradespeople and DIY enthusiasts who require a versatile tool capable of drilling through diverse materials without constant bit changes. Its primary benefit is increased job-site efficiency, though users should be mindful that it is specialized for construction materials and may require specific speed adjustments when transitioning between hard masonry and softer substrates like wood or plastic.
| Model Part Number | 09067 |
|---|---|
| Brand | Draper |
Yes, but use a slow speed and avoid using the hammer action to prevent cracking the tile.
No, this is designed for sheet metal and construction materials, not for high-tensile or hardened industrial steel.
Yes, as long as the drill has a standard 10mm or 13mm chuck, it will fit.
Tungsten carbide tips are extremely hard and generally do not require sharpening. If the tip is chipped or worn down, it is best to replace the bit.
While it can drill into concrete, it is meant for general construction tasks. For heavy-duty, deep-hole drilling in reinforced concrete, a dedicated masonry or SDS bit is recommended.
Ensure the self-centring tip is clean and verify that you are not using an excessively high speed on hard, slippery surfaces like tile.
Retract the bit while the drill is still running to clear out dust and debris using the double flute design.
Check that you are using the correct speed for the material; running at too high a speed in metal or masonry can overheat and degrade the carbide tip.
Setup
Ensure your drill is set to the correct mode before use. For masonry and stone, use a hammer-drill setting if required by the density of the material. For wood, plastic, and metal, ensure the hammer function is turned off to prevent splintering or material damage.
Compatibility
This drill bit is designed for use with standard drill chucks, specifically those sized 10mm and 13mm. Always ensure the bit is seated deeply and tightened securely in the chuck before starting your power tool.
Care
