Kosnic LED Driver - 15 Watt
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Kosnic 15 Watt LED Driver is designed for electricians and DIY enthusiasts needing a reliable power source for low-voltage LED lighting. Its key benefit is providing a stable 12V DC output with integrated protection against short circuits and overloads. A potential consideration is its fixed 15W output, which may not suit applications requiring variable power.
All features
| Model Part Number | KLED15DRV |
|---|---|
| Brand | Kosnic |
Extended Product Information
FAQs
What is the maximum wattage this driver can support?
This Kosnic LED Driver is rated for a maximum output of 15 watts.
What type of voltage does the driver output?
The driver outputs 12V DC (Direct Current).
Can this driver be used with standard AC mains power?
Yes, the driver accepts a wide AC input range from 100V to 240V (50-60Hz).
What safety features are included?
It includes integrated output short-circuit protection and output over-load protection.
Is this driver suitable for outdoor use?
The product specifications do not indicate outdoor rating. It is best used in dry, indoor environments unless installed within a suitable weatherproof enclosure.
How do I connect the wires?
Connect the mains AC power to the input terminals (100-240V) and the LED load to the output terminals (12V DC). Ensure correct polarity for the DC output.
Troubleshooting
LED lights do not turn on
Check that the mains power is on and the input connections are secure. Verify that the output connections to the LED load are correct and that the load does not exceed 15W. Ensure the LED load is compatible with 12V DC.
LED lights flicker or are dim
Ensure the output voltage is stable at 12V DC. Check that the total power draw of the LED load is within the 15W limit and that all connections are firm. Loose connections can cause intermittent power delivery.
Driver is not powering on after a period of use
The driver may have tripped due to over-load protection. Disconnect the LED load and check for any short circuits. If the load is within specifications, allow the driver to cool down before attempting to power it on again. If the issue persists, the driver may need replacement.
Pros and Cons
Pros
- Integrated safety protections (short-circuit and over-load)
- Wide input voltage compatibility for global use
- Stable 12V DC output for reliable LED performance
- Durable construction for longevity
Cons
- Fixed 15W output, not suitable for variable power needs
- Requires manual wiring; not a plug-and-play solution
- May require additional housing depending on installation environment
Setup, Compatibility & Care
Setup:
- Ensure the power source is switched off before beginning.
- Connect the main input wires (live and neutral) to the driver's 100-240V AC input terminals.
- Connect the LED fixture's positive and negative wires to the driver's 12V DC output terminals.
- Secure all connections using appropriate connectors or terminal blocks.
- Restore power and test the LED fixture.
Compatibility:
This driver is compatible with LED loads requiring a 12V DC input and a total power consumption not exceeding 15 watts. It is suitable for LED strips, modules, and low-voltage LED lamps designed for DC power.
Care:
Keep the driver in a well-ventilated area, away from excessive heat and moisture. Clean the exterior with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners.