Best current price£6.19from B&Q
Shopping.co.uk recommended and popular offers
B&Q£6.19Visit shop B&Q - 6.35mm ¼" Shank Steel & Tungsten Carbide Straight Router Cutter (Dia)6.35mm (L)57.2mm
Visit shop1 offer from £6.19
View price history by clicking the chart icon.
This Erbauer Straight Router Cutter is designed for DIY enthusiasts and professionals working with various wood materials like softwood, hardwood, MDF, plywood, and chipboard. Its primary benefit is providing clean, straight cuts due to its durable steel and tungsten carbide construction. A potential consideration is its compatibility requirement for 1/4" routers and the specific shank diameter.
| Brand | Erbauer |
|---|
The shank diameter is 6.35mm, which is equivalent to 1/4 inch.
It is ideal for softwood, hardwood, MDF, plywood, and chipboard.
No, this is a straight cutter designed specifically for making straight grooves or trimming edges. It is not suitable for decorative profiling.
You will need a router with a 1/4" (6.35mm) collet to use this cutter.
After it has cooled down, clean the cutter with a soft brush or cloth to remove dust and debris. Avoid using abrasive cleaners.
The total length of the cutter is 57.2mm.
Ensure the cutter is sharp. If dull, it may need replacement. Check that the router speed is appropriate for the material and that the cutter is inserted to the correct depth.
Verify the shank is fully and securely seated in the collet. Ensure the cutter is not bent or damaged. Check that the router itself is functioning correctly.
Reduce the depth of cut per pass. Ensure the material is properly supported. For laminated materials, a sharp cutter and a slower feed rate can help minimize chipping.
To set up the Erbauer Straight Router Cutter, ensure your router is unplugged. Insert the 6.35mm shank firmly into the router's collet and tighten securely according to your router's manual. This cutter is compatible with any router that accepts a 1/4" (6.35mm) shank. Always ensure the router speed is appropriate for the material being cut. After use, remove the cutter once it has cooled down. Clean the cutter by removing any dust or debris with a soft brush or cloth. Store the cutter in its original packaging or a protective case to prevent damage to the cutting edges. Avoid exposing the cutter to moisture to prevent rust.
