Deflow Surf 2 Piece Pad - BUR
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Deflow Surf 2 Piece Pad is an essential accessory for intermediate to advanced surfers seeking enhanced board control and comfort. Designed for performance, it features a unique combination of a smooth surface and wrinkled foamy cubes that provide a reliable grip for your back foot, though its specific two-piece construction may require careful alignment during installation compared to one-piece alternatives.
All features
| Model Part Number | A00061.05-BUR-2 |
|---|---|
| Brand | Deflow Surf |
Extended Product Information
FAQs
Can I trim this pad to fit my board?
Yes, the foam material can be trimmed with a sharp utility knife if you need to adjust the shape to fit a specific tail design.
How long should I wait before surfing after application?
We recommend waiting at least 24 hours to ensure the pressure-sensitive adhesive has fully bonded to the fiberglass.
Is this pad suitable for longboards?
While typically used for shortboards, it can be applied to any board where you desire a fixed back-foot traction point.
Will the color fade in the sun?
Like all foam deck pads, it is subject to UV exposure. Storing your board in a bag when not in use will help maintain the color.
Does it work well in cold water?
Yes, the foam maintains its structure and grip characteristics across various water temperatures.
Troubleshooting
Pad edges starting to peel
Clean the area thoroughly, re-apply a small amount of waterproof contact adhesive, and press down firmly for several minutes.
Pad not sticking to the board
Ensure the board was completely free of old wax and cleaning residue before initial installation.
Pros and Cons
Pros
- Adjustable width due to two-piece construction
- High-profile 25mm tail kick for maximum control
- Soft foam material prevents skin abrasion
- Unique wrinkled texture enhances grip security
Cons
- Requires precise alignment during setup
- Limited to specific colorway aesthetics
- Two-piece design may leave a gap if not applied correctly
Setup, Compatibility & Care
To ensure optimal adhesion, start with a clean, dry, and wax-free surfboard deck.
- Wipe the area with an alcohol-based cleaner to remove residue.
- Lay out both pieces without removing the adhesive backing to find your preferred placement relative to your fins.
- Peel the backing and apply firmly, starting from the center and working outwards to eliminate air bubbles.
- Apply pressure evenly across the entire surface.
- Wait at least 24 hours before surfing to allow the adhesive to fully cure.
For care, simply rinse the pad with fresh water after each session and store your board out of direct, prolonged sunlight to prevent premature material degradation.