Radiator & Towel Rail Valve Pipe Reducer (Pair) - Manissa - Red

The Manissa Radiator & Towel Rail Valve Pipe Reducer is used to convert 15mm pipework so that it can connect to radiator or towel rail valves designed for 10mm pipe connections.

Yes, this reducer is suitable for use with both copper and plastic pipework.

These reducers are designed to fit any standard 1/2" - 15mm valve, including straight, angled, and corner valve types.

Installation involves loosening the valve's locking ring, inserting the reducer, adjusting its protrusion if needed using the 19mm tail, and then tightening the valve locking nut.

The 19mm tail length refers to the part of the reducer that inserts into the valve. This length can be adjusted to manage the distance the reducer protrudes from the valve base, aiding installation.

This product is sold as a pair.

The reducer is designed to accept 15mm pipework and reduce it to fit a valve designed for 10mm pipe connections.

Ensure the valve locking nut is sufficiently tightened over the reducer. Check that the 15mm pipe is fully inserted into the reducer and that the reducer is correctly seated within the valve. Inspect both the reducer and valve for any damage.

Verify that you are using a standard 1/2" - 15mm valve. Ensure no debris is present inside the valve where the reducer is inserted. Confirm that the reducer is the correct model for the intended pipe size conversion.

Ensure the 15mm pipe end is clean and free of burrs. If using plastic pipe, ensure it is properly prepared according to manufacturer guidelines. The reducer is designed to accept standard 15mm pipe fittings.