Best current price£49.99from eBay
Shopping.co.uk recommended and popular offers
eBay£49.99Visit shop ProWarm Electric Underfloor Heating 200w Loose Cable 125M *New*
Visit shop
B&Q£257.39Visit shop B&Q - Underfloor Heating Cable 100W: 12.5M2. 150W: 8.3M2. 200W: 6.2M2
Visit shop3 offers from £49.99 - £257.39
View price history by clicking the chart icon.
The ProWarm Electric Underfloor Heating Cable is designed for homeowners seeking efficient and versatile warmth for any room, including those with irregular shapes. Its key benefit is providing consistent, customizable heating across various floor types with an easy DIY installation process. A notable caveat is that the cable cannot be cut or shortened, requiring careful planning of room coverage.
| Brand | Prowarm |
|---|
No, the ProWarm Electric Underfloor Heating Cable cannot be cut or shortened. It is a series-type cable, and cutting it will damage the heating element and render it inoperable.
We recommend covering approximately 90% of the floor space with the heating cable. Avoid placing cables under fixed units like kitchen cabinets or large appliances.
The CableSafe Guarantee provides a free replacement for your ProWarm cable if it is accidentally cut during the installation process. Proof of purchase and installation details may be required.
Yes, a compatible thermostat is required to control the underfloor heating system. Ensure the thermostat is designed for electric underfloor heating systems and has a probe input for the floor sensor.
Installation time can vary depending on the room size and complexity. Typically, laying the cable and connecting it to the thermostat can take several hours to a full day for a standard room.
This system is designed to be installed on the subfloor before the final floor covering is laid. It is generally not recommended to install directly over existing finished flooring.
The ProWarm Electric Underfloor Heating Cable has a power output of 10W per linear meter.
Check all electrical connections to the thermostat and power supply. Verify the thermostat is set correctly and functioning. Ensure the circuit breaker is engaged. Use a multimeter to test the cable's continuity and resistance against the specified values in the manual.
Ensure the cable spacing was consistent during installation. Check for any potential blockages or damage to the cable that may have occurred during installation. Verify the room's insulation and consider drafts.
Refer to the thermostat's manual for specific error code meanings and corresponding troubleshooting steps. Common issues might relate to sensor faults or connection problems.
Ensure the subfloor is clean, dry, and free from dust. Check room temperature and humidity levels, as these can affect drying times. Apply a thin, even coat as recommended.
Setup: Begin by planning your layout, ensuring the cable covers approximately 90% of your floor space, avoiding areas with permanent fixtures. Clean the subfloor thoroughly. Apply the ProWarm Floor Primer evenly using the provided roller. Once the primer is dry, carefully lay the ProWarm Underfloor Heating Cable, securing it with the adhesive tape. Ensure the cables are spaced correctly and do not touch each other. Install the conduit for the thermostat sensor. Connect the cold lead to your thermostat and the power supply according to the installation manual and local electrical codes. Note: The cable cannot be cut or shortened.
Compatibility: This heating cable is compatible with a wide range of floor finishes, including tile, stone, laminate, and engineered wood. It requires a compatible thermostat for operation (sold separately or as part of a kit). Ensure your subfloor is suitable and dry before installation.
Care: Once installed and covered by your chosen floor finish, the system requires minimal maintenance. Regular cleaning of the floor surface is all that is needed. Avoid abrasive cleaners or tools that could damage the floor covering or the heating cable beneath.
