Frenchic Wall Paint - Emerald Isle

No, this paint is formulated to be self-priming and self-sealing, meaning no separate primer or top coat is required.

While one coat provides coverage, two coats are recommended for optimal depth of colour and enhanced durability.

A 2.5L tin covers approximately 35m² with a single coat. Two coats will cover around 17.5m².

It is suitable for kitchen cupboards and interior walls/ceilings. It is not recommended for very wet areas like shower enclosures or bath surrounds.

Once cured, the paint is washable and scrubbable. Use a soft, damp cloth. For stubborn marks, a mild detergent solution can be used gently.

Yes, the paint is EN71-3 certified, making it safe for use on children's toys.

It has an ultra-matte finish, which is non-reflective and provides a sophisticated look.

Ensure paint is well-stirred and applied evenly with a good quality brush or roller. Check for adequate paint load on the applicator and maintain a wet edge during application.

This may indicate insufficient drying conditions (low temperature, high humidity) or that the surface is not fully cured. Ensure the room is well-ventilated and allow more time. Avoid heavy use until fully cured.

The surface may not have been properly prepared. Ensure it is clean, dry, and free from contaminants like grease or dust. Lightly abrading non-porous surfaces might be necessary.

While scrubbable, the ultra-matte finish requires gentle cleaning. Use a soft, damp cloth first. If necessary, use a mild detergent solution, testing in an inconspicuous area. Avoid excessive rubbing or abrasive cleaners.