Blueprint Joinery Ltd Core Deck Colonial Treated Decking Balustrade Basic Kit 1800mm

You will need a saw (hand saw or circular saw), measuring tape, level, drill, screwdriver, safety glasses, and gloves.

Yes, you can paint or stain the balustrade to customize the finish and provide additional protection. Ensure the wood is clean and dry before applying any finish.

Yes, the softwood is pre-treated with Celcure wood preservative, providing protection against rot and decay.

With proper installation and maintenance, the balustrade should last for many years. Regular cleaning and occasional re-staining or painting will extend its lifespan.

Yes, you can adjust the height by cutting the spindles to the desired length during installation. Ensure the overall height complies with local building codes.

Contact Blueprint Joinery customer service to inquire about replacement parts. Provide the specific part needed and details of your kit.

This kit is primarily designed for residential use. For commercial applications, consult local building codes and consider a more heavy-duty balustrade solution.

The spacing between the spindles should comply with local building codes to ensure safety. Check the regulations in your area for the required spacing.

Ensure the bottom and top rails are perfectly level during installation. Use a level to check each spindle as it's installed.

Double-check that all screws and fixings are securely tightened. Reinforce any weak points in the deck frame or balustrade structure.

If the wood is rotting, it must be replaced. Ensure the wood is properly treated and maintained to prevent future damage. Also check if the water is draining properly.

Use sharp saw blades and make sure the wood is securely held during cutting. Consider using a saw guide for straight, accurate cuts.