Command Picture Hanging Strips - White

Large strips can hold up to 7kg per 4 pairs (3.5kg per 2 pairs), and Medium strips can hold up to 5kg per 4 pairs (2.5kg per 2 pairs). Always check the specific weight limits for the size of strips you are using.

No, Command Picture Hanging Strips are designed for single use only. Once removed, they cannot be re-applied.

They adhere well to most smooth, clean surfaces, including painted walls, finished wood, tile, and metal. They are not recommended for wallpaper, textured walls, or vinyl surfaces.

To remove, gently grasp the tab and stretch it straight down along the wall, slowly peeling the strip away. Avoid pulling the strip outwards or upwards.

Command Picture Hanging Strips are designed for indoor use only.

Incorrect application can lead to a weak bond, causing the frame to fall, or difficulty during removal. Always follow the application instructions carefully, ensuring proper surface cleaning and pressure.

Yes, they are a safe alternative to nails, especially in environments where children are present, as they eliminate the risk of sharp objects and damage to walls.

Ensure the surface was properly cleaned with rubbing alcohol and fully dried before application. Verify that the weight of the frame does not exceed the maximum limit for the number of strips used. Press firmly on both surfaces for the recommended 30 seconds during application.

This typically occurs if surface preparation was inadequate, the weight limit was exceeded, or the strips were not applied correctly. Clean the surface again and reapply with new strips, ensuring all steps are followed precisely and the weight capacity is not exceeded.

Gently stretch the tab downwards along the wall surface until the strip releases. Pulling straight out or upwards can cause paint damage. Ensure the surface is suitable for the strips and that they have not been in place for an excessively long period, which could compromise adhesion to the paint layer.