Best current price£17.80from eBay
Shopping.co.uk recommended and popular offers
eBay£17.80Visit shop US PRO Tools 110pc Threaded Nut Hand Riveter M3, M4, M5, M6, M8 5467
Visit shop
B&Q£18.69Visit shop B&Q - Tools 110Pc Threaded Nut Hand Riveter M3M4M5M6M8 5467
Visit shop4 offers from £17.80 - £18.69
View price history by clicking the chart icon.
This US PRO Tools Hand Riveter is designed for DIY enthusiasts and professionals needing to install threaded rivet nuts in tight or hard-to-reach spaces on materials like body panels, bicycle frames, and furniture. Its primary benefit is enabling secure fastening from one side, even with limited access. A potential caveat is that mastering the technique for consistent, strong rivet nut installation may require some practice. The kit includes a durable riveter with a 40CR pull mechanism, steel body with PVC handles, and a comprehensive set of interchangeable mandrels (M3-M8) along with starter rivet nuts and a storage case.
| Model Part Number | 5467 |
|---|---|
| Brand | us pro |
This hand riveter is designed for installing threaded rivet nuts in materials where access is limited to only one side, suitable for applications like body panels, bicycle frames, and furniture.
The riveter comes with interchangeable mandrels for metric sizes M3, M4, M5, M6, and M8.
Yes, the kit includes a selection of steel threaded rivet nuts to get you started: M3 (40pcs), M4 (24pcs), M5 (20pcs), M6 (10pcs), and M8 (10pcs).
The included starter selection of rivet nuts are made of steel.
The hand riveter is approximately 11 inches (270mm) in length.
You can change the mandrels using the included wrench to unscrew the nose piece, swap the mandrel, and then screw the nose piece back on.
While the tool is designed for both aluminum and steel rivet nuts, it is recommended to check the specifications of the rivet nuts you intend to use, as some may require more force than this hand riveter can comfortably provide for proper setting.
Ensure the correct mandrel size is installed for the rivet nut. Check that the rivet nut is properly seated on the mandrel. Verify the pull mechanism is clean and lightly lubricated.
The rivet nut may not have been seated properly, or the material is too thin. Ensure you are using the correct size rivet nut for the material thickness. Practice on scrap material to perfect the pulling stroke.
Make sure the riveter is fully open and that you are using the correct wrench for the nose piece. Ensure the mandrel is not cross-threaded when being removed or installed.
Clean the pull mechanism and apply a light coat of lubricant to the moving parts. Check for any obstructions or bent components.
Setup:
Compatibility:
This tool is designed for installing aluminum or steel threaded rivet nuts in metric sizes M3, M4, M5, M6, and M8. It is compatible with a wide range of materials including sheet metal, plastics, and composites, provided the material can support the rivet nut's threads.
Care:
