Best current price£59.99from Scan Computers
Shopping.co.uk recommended and popular offers
Scan Computers£59.99Visit shop Montech King Pro Argb Microatx Tower Pc Case Size 15 White King 15 Pro (W)
Visit shop2 offers from £59.99 - £88.92
View price history by clicking the chart icon.
1 offer from £40.00
View price history by clicking the chart icon.
The Montech KING 15 PRO PC Case in white is designed for PC enthusiasts building high-performance Micro-ATX systems who prioritize component visibility and efficient cooling. Its standout benefit is the chimney airflow design combined with pre-installed ARGB fans for superior thermal management, while a potential caveat is its compact size which may limit compatibility with extremely large components.
| Colour | White |
|---|---|
| Model Part Number | KING15PW |
| Brand | Montech |
The Montech KING 15 PRO supports Micro-ATX and Mini-ITX motherboards.
The case comes with 6 pre-installed ARGB PWM fans and a fan hub.
Yes, the case supports up to a 360mm radiator.
It features a chimney airflow design, which promotes upward air movement for efficient cooling.
Use a soft, lint-free cloth lightly dampened with water or a mild glass cleaner. Avoid abrasive materials.
This model is white.
While the case offers cable management features, its compact nature means careful planning and routing are recommended for optimal results.
Verify that the power supply is connected securely to both the wall outlet and the case. Double-check the front panel connectors are correctly plugged into the motherboard.
Ensure the fan power cables are connected to the fan hub and the hub is powered (e.g., via SATA power). Check ARGB cables are correctly connected to the motherboard's ARGB header or the hub's designated ports.
Confirm all fans are spinning in the correct direction for optimal airflow (typically intake from front/bottom, exhaust from rear/top). Clean dust filters and ensure no cables are obstructing airflow. Verify the CPU cooler is properly mounted and thermal paste is applied correctly.
Check the GPU's length against the case's maximum GPU clearance specification. You may need to remove drive cages or adjust cable routing to accommodate larger cards.
Setup: Begin by opening the case, typically by removing the side panels. Install your Micro-ATX or Mini-ITX motherboard, CPU, RAM, and GPU according to standard PC building procedures. Mount your storage drives (SSDs/HDDs) in the designated bays. Install your power supply unit. Connect all power and data cables, paying attention to the motherboard's front panel connectors for power buttons and LEDs. Route cables efficiently using the case's built-in management features to optimize airflow.
Compatibility: This case is designed for Micro-ATX and Mini-ITX motherboards. Ensure your graphics card does not exceed the maximum length supported by the chassis. CPU cooler height clearance and PSU length should also be checked against the case specifications if using non-standard components.
Care: To maintain the aesthetic and performance, regularly dust the interior of the case using compressed air. Clean the panoramic glass panel with a soft, lint-free cloth slightly dampened with water or an approved glass cleaner. Avoid abrasive cleaners. Ensure all fan filters are cleaned periodically to maintain optimal airflow.
