This Shower Filter effectively reduces impurities in your tap water, including over 90% of chlorin...This Shower Filter effectively reduces impurities in your tap water, including over 90% of chlorine, copper, iron, and lead. Its innovative refillable design uses 70% less plastic compared to other brands. Installation is simple and requires no tools, taking just two minutes. Test results show a reduction of over 90% in chlorine, and 88% of users reported softer hair and skin after one month. The filter is composed of KDF 55 to reduce water-soluble metals like lead, iron, copper, mercury, and nickel; Calcium Sulphite to reduce chlorine; Granular Activated Carbon to reduce trihalomethane (THMs) and odour; and Ceramic Beads to enhance filtration. Counteract the effects of hard water, which can lead to dry, tight-feeling skin and brittle hair. Unfiltered water can cause minerals to crystallize on hair strands, leading to breakage, and create soap scum that draws out natural moisture from the skin. The Shower Filter works by reducing unwanted metals, chlorine, and impurities. KDF 55 tackles heavy metals, Calcium Sulphite reduces chlorine and its byproducts, Activated Carbon removes further contaminants and odour, and Ceramic Beads optimize water pH and boost filtration. To install, simply remove the shower cord from your tap, connect the Hello Klean Shower filter, and reattach the shower cord to the bottom of the filter. Run the water for 30 seconds after installation. Each capsule filters 13,000 litres, lasting approximately 4 months for a two-person household. The Hello Klean Shower Filter fits under the tap to optimize your water for consistently better hair and skin. It is distinct from the Shower Head, which also uses the same filtration technology but fits all handheld showers, enhancing water pressure and saving water.
The Hello Klean Shower Filter is designed for anyone looking to improve their water quality and protect their skin and hair from the effects of hard water and chlorine. Its primary benefit is reducing impurities, leading to softer skin and hair. However, it's important to remember that filter replacement is needed every four months for optimal performance. This guide provides comprehensive information on setup, usage, and maintenance of the Hello Klean Shower Filter, ensuring you get the most out of your purchase.
All features
Model Part Number
140238395
Brand
Hello Klean
Extended Product Information
FAQs
How often do I need to replace the filter?
The filter should be replaced approximately every four months or after 13,000 liters of water use for a two-person household.
Is any tools needed for installation?
No, the installation is tool-free and takes about two minutes.
What does the filter remove from the water?
The filter reduces chlorine, copper, iron, lead, and other impurities.
Will this filter affect water pressure?
There might be a slight reduction in water pressure. However, it is usually not significant.
How do I know when to replace the filter?
Besides the time frame (approximately every four months), you may notice a decrease in water quality or pressure, which indicates it's time for a replacement.
What is the filter made of?
The filter is composed of KDF 55, Calcium Sulphite, Granular Activated Carbon, and Ceramic Beads.
Is the Hello Klean Shower Filter the same as the Hello Klean Shower Head?
No, the Shower Filter is installed between your water source and the shower head and the Shower Head integrates the filtration into the shower head itself.
Troubleshooting
Reduced water pressure.
Check if the filter is clogged. Replace the filter capsule if necessary.
Water tastes or smells unusual.
Flush the filter by running water for a longer period (up to a minute) after installation or a filter replacement.
Leaking around the connections.
Ensure all connections are tightened securely. Check for any damaged parts and replace them if needed.
Pros and Cons
Pros
Easy, tool-free installation.
Reduces harmful chemicals and heavy metals.
Reported improvements in skin and hair softness.
Environmentally friendly refillable design.
Cons
Requires periodic filter replacements.
May slightly reduce water pressure.
Initial water run-off may have some odor during the first use.
Setup, Compatibility & Care
Setup:
Remove your existing shower cord from the tap.
Connect the Hello Klean Shower Filter to the tap.
Reattach your shower cord to the bottom of the filter.
Run the water for approximately 30 seconds after installation to flush the filter.
Compatibility:
The Hello Klean Shower Filter is designed to fit most standard shower arms. It is compatible with all handheld showers.
Care:
Replace the filter capsule every four months or after 13,000 liters of water use, to maintain optimal filtration efficiency.
No special cleaning is needed for the filter itself; simply replace the capsule when necessary.