Shopping.co.uk

Finder 4C Relay Interface Module - 230 V AC

Finder 4C Relay Interface Module - 230 V AC

This Finder 4C.01.8.230.0060 relay interface module features a 230V AC coil voltage and SPCO (Sing...

Best current price£13.78from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

20 offers from £13.78 - £23.74

View price history by clicking the chart icon.

eBayFinder Relay 2CO 12VDC
£3.50 delivery
£13.78
Visit shop
Tameson UKFinder 16A Interface Relay Module 12V Dc With Led - 4C.01.9.012.0050
Free delivery in 1–3 days
£14.40
Visit shop
Rapid Online - Rapid Electronics Ltd.Finder 4C.02.9.012.0050 Relay 2CO 12VDC
Free delivery in 1–3 days
£14.72
Visit shop

Product Information

Full details

This Finder 4C Relay Interface Module is designed for electrical engineers and automation technicians who need a reliable way to interface control signals with higher power loads. Its key benefit is providing electrical isolation and signal amplification for 230V AC control systems, with a caveat that its contact configuration is single pole changeover (SPCO). This module features a 230V AC coil, SPCO contacts, screw terminations, and DIN-rail mounting.

All features

Series4C
Model Part Number4C.01.8.230.0060
BrandFinder

Extended Product Information

FAQs

What is the coil voltage for this specific module?

The coil voltage for the Finder 4C.01.8.230.0060 is 230V AC.

What type of contacts does this relay have?

This module features Single Pole Changeover (SPCO) contacts, also known as Single Pole Double Throw (SPDT).

How is this relay mounted?

It is designed for mounting on a standard 35mm DIN rail (EN 60715).

Can I use this relay to switch a 12V DC load?

Yes, if the current and voltage of the 12V DC load are within the contact's switching capacity. However, the coil itself requires a 230V AC supply.

What is the maximum current rating for the contacts?

The specific current rating depends on the load type (AC/DC) and inductive/resistive nature. Refer to the product datasheet for precise ratings, but typically such modules handle up to 8A or 10A resistive loads.

Does this module have an LED indicator?

The base model 4C.01.8.230.0060 does not include an integrated LED indicator for coil status. Variants with an LED are available, often denoted by 'SPA' in their part number.

What is the operating temperature range?

Finder relays typically operate within a standard industrial temperature range, often around -40°C to +70°C, but always check the official datasheet for the exact specifications.

Troubleshooting

Relay does not energize when control signal is applied.

Verify that the coil voltage (230V AC) is correctly applied to terminals A1 and A2. Check for loose connections or a faulty control signal source. Ensure the coil is not damaged.

Relay contacts are welded or stuck in one position.

This indicates contact failure, likely due to overload or excessive switching. The relay will need to be replaced.

Relay buzzes or hums loudly.

Ensure the coil voltage is correct. Low or fluctuating voltage can cause humming. Check for any mechanical obstructions.

Incorrect switching behavior (e.g., not opening/closing correctly).

Confirm correct wiring of the SPCO contacts (common, NO, NC). Ensure the load connected does not exceed the contact ratings. Check for mechanical damage.

Pros and Cons

Pros

  • Provides robust electrical isolation between control and load circuits.
  • Compact form factor ideal for space-constrained control panels.
  • Easy installation on standard DIN rails.
  • Reliable operation with a 230V AC coil.
  • Secure screw terminals for dependable connections.

Cons

  • Single Pole Changeover (SPCO) limits switching flexibility compared to Double Pole.
  • Requires a 230V AC supply for the coil, not suitable for lower voltage DC control.
  • Not designed for high inrush current applications without appropriate oversizing or external contactors.
  • No integrated LED indicator for coil status (on some variants, but not this specific model).

Setup, Compatibility & Care

Setup:

  1. Ensure the power supply to the installation is switched off.
  2. Mount the module onto a standard 35mm DIN rail (EN 60715) by clipping it into place.
  3. Connect the control circuit to the coil terminals (typically A1 and A2) according to the wiring diagram. Ensure the coil voltage matches the module's rating (230V AC).
  4. Wire the load circuit to the appropriate contact terminals (common, normally open, normally closed).
  5. Double-check all connections for security and correctness.
  6. Restore power and test the module's operation.

Compatibility:

  • This module is designed for 230V AC coil voltage. Ensure your control signal matches this requirement.
  • The contacts are rated for specific current and voltage loads. Always verify that your load does not exceed these ratings.
  • It is designed for standard industrial control cabinet environments.

Care:

  • Keep the module clean and free from dust and moisture.
  • Periodically check screw terminal connections for tightness, especially in environments with vibration.
  • Avoid overloading the contacts, as this can lead to premature failure.

Price History

DatePrice
Visit shop