AEM Electronics Water/Methanol Injection 5 Gallon Tank Kit With Sensor

The primary benefit is its large 5-gallon capacity, which allows for longer run times before needing a refill, and the integrated, highly accurate conductive fluid level sensor that works with error monitoring controllers.

It is compatible with almost any water/methanol application using a 1/4" OD hose. It is designed as a component and requires an existing injection system.

The sensor is conductive and measures the fluid level based on electrical conductivity. It is designed to be resistant to mechanical failures often associated with float sensors.

No, this is a fluid storage tank and sensor kit. It is designed to be integrated into an existing or new water/methanol injection system that includes a pump and distribution components.

Periodic inspection for leaks and damage, ensuring clean refilling with the correct mixture, and checking electrical connections are recommended. Avoid harsh chemicals for cleaning.

Conductive sensors have no moving parts susceptible to mechanical failure or clogging from debris, leading to greater reliability and accuracy over time.

No, this kit includes the 5-gallon tank and the fluid level sensor. Pumps, lines, and nozzles are typically sold separately as part of a complete water/methanol injection system.

Ensure the sensor wiring is securely connected to the controller and that the electrical socket is clean. Verify that the fluid used has sufficient conductivity for the sensor to operate. Check for any debris interfering with the sensor's conductive elements.

Inspect all hose connections for tightness. Ensure the 1/4" OD hoses are properly seated and secured with appropriate clamps. Check the tank's fittings for any cracks or damage.

Consult your controller's manual for specific error codes. Verify the sensor is compatible with your controller's monitoring system and that the wiring is correct. Check the fluid level itself; a critically low level might trigger a specific error.