Draper Touch Screen Digital Multimeter - 16232

Select the AC voltage function on the touchscreen (usually indicated by a 'V' with a wavy line). Place the test leads on the circuit you want to measure.

Select the resistance function (Ω) on the touchscreen. Ensure the circuit is de-energized before measuring. Place the test leads across the component.

Press the 'Hold' button on the multimeter to freeze the current reading on the screen. Press it again to release the hold.

The flashlight provides illumination in dark or dimly lit environments, making it easier to see the circuit or components you are testing.

Use the provided USB-C charging cable and connect it to a USB power source. The device will indicate when it is charging.

Refer to the specifications section of the user manual. Do not exceed the maximum voltage rating to avoid damage to the device.

Warranty information is generally found within the packaging or the included documentation. It is also usually available on the Draper Tools website.

Ensure the device is charged. Connect to a USB-C power source using the provided cable. If the issue persists, check the power button and consult the user manual.

Verify the correct measurement function is selected. Check the test leads for damage and ensure they are properly connected. If measuring AC voltage, make sure you are not measuring DC voltage and vice versa.

Ensure the device is set to the continuity setting (often indicated by a diode symbol or a symbol that looks like a speaker). Verify the circuit being tested is complete.

Charge the device. Adjust the display brightness in the settings menu. If the problem persists, the display may need to be replaced.