Blum Magnetic Push-To-Open Tip-On Set - Grey - 956A1004

The primary advantage is achieving a clean, handleless look on large cabinet doors by allowing them to be opened with a simple push.

It is specifically designed for large cabinet doors over 1300 mm high and works best with un-sprung hinges. Compatibility with your specific hinge type and door size should be verified.

You will need a drill with a 10 mm drill bit for direct installation. A screwdriver is required for attaching the magnetic plate. An adaptor (sold separately) may also require specific tools depending on its mounting method.

The adjustable alignment (+4 mm / -1 mm) allows for precise positioning of the cabinet door after installation, ensuring a flush and professional appearance.

No, the adaptor (part 956A1201) is sold separately and is required if you cannot drill directly into the cabinet carcase.

The Tip-On mechanism is made of high-quality nylon for durability.

Clean the exterior with a soft, damp cloth. Avoid using abrasive cleaners to prevent damage to the material.

Check alignment between the magnetic plate on the door and the Tip-On mechanism. Ensure there are no obstructions. Verify that the door hinges are functioning correctly and not binding.

Confirm that the Tip-On set is suitable for the door size and weight. Ensure the pistons are not obstructed. For very heavy doors, ensure the correct model is used.

Utilize the +4 mm / -1 mm adjustment feature on the Tip-On mechanism to fine-tune the door position. Ensure the initial mounting hole or adaptor position is accurate.

Ensure the fixing screw is securely tightened. Check the door surface for any finish that might prevent adhesion if adhesive mounting was used (though this model uses a screw).