Best current price£22.19from Debenhams
Shopping.co.uk recommended and popular offers
Debenhams£22.19Visit shop Loops Unisex Multicolor 24 X 450Mm Sds Plus Drill Bit - Fully Hardened & Ground - Smooth Drilling
Visit shop4 offers from £22.19 - £23.49
View price history by clicking the chart icon.
The Loops SDS Plus 24mm x 450mm drill bit is designed for professional contractors and serious DIY enthusiasts who require reliable, heavy-duty performance when drilling through concrete and masonry. Its primary benefit is the precision-ground design that ensures smooth, consistent bores over long durations, though users should note that the large 24mm diameter requires a powerful SDS Plus hammer drill to operate effectively without stalling.
| Model Part Number | ys08468 |
|---|---|
| Brand | Loops |
No, this bit requires an SDS Plus hammer drill. It will not fit into a standard three-jaw chuck.
It is optimized for concrete, masonry, brick, and stone.
No, this bit is designed for dry drilling. Water is not required and may cause debris to turn into a thick paste, which can clog the bit.
No, SDS Plus and SDS Max are different systems. You would need an adapter to use this on an SDS Max machine.
Visually inspect the tip. If the carbide edges are rounded or missing, or if the bit takes significantly longer to drill the same depth, it is time for a replacement.
Withdraw the bit frequently during drilling to clear dust and allow the drill to run for a few seconds without load to clear the flutes.
Ensure the drill is set to hammer-drill mode and check that the shank is properly seated in the SDS Plus chuck.
Apply less forward pressure and ensure the dust evacuation path is clear; heat is often a result of friction from trapped debris.
To set up, simply retract the locking collar on your SDS Plus chuck and insert the bit until it clicks into place. Ensure the locking mechanism is fully engaged before starting the motor. This bit is strictly for use with SDS Plus compatible tools; attempting to use it with a standard three-jaw drill chuck requires a specific adapter, which is generally not recommended for bits of this diameter.
To care for your bit, keep the shank lightly lubricated with drill grease to prevent wear on the chuck. After use, inspect the carbide tip for signs of chipping. Store in a dry, cool place to prevent oxidation, and clean away excess concrete debris after every use to ensure a long service life.
