miLINK FM-BVM - Car Air Vent Mount Bluetooth FM Transmitter

Scan through your car radio's FM stations. Listen for frequencies with no or very little static. Many apps are also available that can help identify unused frequencies in your area.

The miLINK FM-BVM is designed for audio transmission and hands-free calls; it does not have a USB port intended for charging devices.

While not explicitly stated, these types of devices typically support standard SD card capacities up to 32GB and USB drives formatted as FAT32.

If your car's navigation audio is routed through the car's speakers, and your car has an FM radio, you can tune into the FM-BVM's broadcast frequency to hear it.

You can turn off Bluetooth on your phone, or you can forget the FM-BVM device in your phone's Bluetooth settings. The device will also disconnect if it loses power.

The gooseneck allows you to adjust the position and angle of the entire unit, including the display and microphone, for optimal viewing and usability.

Ensure the 12V adapter is securely plugged into both the device and the car's power outlet. Try a different 12V outlet.

Turn off Bluetooth on your phone and then turn it back on. Restart the FM-BVM. Ensure the device is within range and not already connected to another device.

Try tuning your car radio to a different, clearer FM frequency. Ensure the FM-BVM is set to broadcast on that frequency. Minimize interference by turning off other nearby electronic devices if possible.

Ensure the USB drive or SD card is properly inserted and formatted (typically FAT32). Verify the audio files are in a compatible format (e.g., MP3).

Check that the microphone is not obstructed. Ensure the device is correctly paired via Bluetooth and that call audio is enabled for the FM-BVM in your phone's Bluetooth settings.