Hamilton Prestige Roller Sleeves - 4" Short Pile - 2 Pack

These short pile roller sleeves are best for smooth surfaces such as interior doors, cabinets, trim, and walls where a smooth, non-textured finish is desired.

No, they are specifically designed for standard 4-inch mini roller frames. Please ensure you have a compatible frame.

Each pack contains two roller sleeves.

Yes, they are suitable for use with most common water-based and solvent-based paints, including emulsions, gloss, and satin finishes.

For water-based paints, rinse under running water and squeeze out excess. For solvent-based paints, use the appropriate solvent for cleaning. Allow them to air dry completely before storing.

No, the short pile design is intended to provide a smooth, even finish with minimal texture, ideal for flat surfaces.

Yes, with proper cleaning and care, these roller sleeves can be reused multiple times.

Ensure the roller sleeve is properly seated on the frame. For new rollers, rolling over a piece of masking tape or a clean dust sheet can remove any loose fibres before painting. Ensure you are using the correct type of roller for the paint and surface.

Check if the roller is overloaded with paint or if the paint is too thick. Ensure you are using a consistent, even pressure. For very smooth finishes, a short pile roller like this is recommended; ensure no blockages or debris are on the sleeve.

Ensure the roller is properly loaded with paint by rolling it gently in the paint tray. Do not press too hard. If the paint is very thick, it might require thinning slightly according to the manufacturer's instructions.