Cables Direct networking cable - CAT6 - Pink - 0.5 m

Cat6 stands for Category 6, a network cable standard designed for Gigabit Ethernet. U/UTP means Unshielded Twisted Pair, indicating the cable's internal wires are twisted together but lack an overall metallic shield, making it suitable for most standard environments.

According to TIA/EIA standards, the maximum reliable length for a Cat6 cable for 1000BASE-T (Gigabit Ethernet) is 100 meters (328 feet). This specific cable is only 0.5 meters long.

No, this cable is U/UTP, meaning it is Unshielded Twisted Pair. It does not have an overall metallic shield around the twisted pairs.

While Cat6 cables are rated for 250 MHz, which supports Gigabit Ethernet, they can sometimes support 10 Gigabit Ethernet over shorter distances (typically up to 55 meters). However, for consistent 10Gbps performance, Cat6a or higher is recommended.

The pink color is a cosmetic choice. Functionally, it does not affect the cable's performance. Cables Direct offers this model in various colors, often used to help identify different network connections.

AWG stands for American Wire Gauge. A 24 AWG rating indicates the thickness of the copper wire inside the cable. Lower AWG numbers mean thicker wires, while higher numbers mean thinner wires. 24 AWG is a common and effective gauge for Cat6 patch cables.

Ensure both ends of the cable are securely plugged into the correct ports. Verify the network ports on both devices are active. Try a different network cable to rule out a cable fault.

Confirm that both connected devices and your network infrastructure support Gigabit Ethernet. Check for other network congestion. Ensure the cable is not damaged and connectors are clean.

Inspect the cable for any visible damage, kinks, or sharp bends. Ensure the RJ-45 connectors are fully seated and clean. Consider environmental factors that might cause interference if the cable is near power lines or appliances.