Kenable Cable Hole Entry/Exit Plate - Black

The primary purpose is to seal cable entry points on external walls, preventing water damage and hiding unsightly holes or damaged brickwork around the cables.

You should use a suitable outdoor bonding adhesive designed for exterior use and compatible with masonry. Always follow the adhesive manufacturer's specific instructions for application and curing.

Yes, it features a 30mm cavity depth and a 25mm cable exit designed to accommodate multiple cables such as power, coaxial, and Ethernet through a single cover.

The cover plate dimensions are approximately 110 x 110 x 33mm.

It is designed for brick, masonry, and similar external wall surfaces. Ensure the surface is relatively smooth and clean for effective adhesion.

No, the plate is designed for adhesive fixing and requires a suitable outdoor bonding adhesive to be purchased separately.

It is ideal for satellite dish feeds, Virgin Media connections, outdoor CCTV camera cables, external lighting wiring, garden office networking, and any external cable entry or exit point.

Ensure the wall surface was thoroughly cleaned and dried before application. Use a high-quality outdoor bonding adhesive suitable for your wall type and allow adequate curing time in dry conditions.

The seal may be compromised. Inspect the edges of the plate and the area around the cable exit for gaps. Re-apply adhesive to ensure a watertight seal, or consider a more robust sealing method if the surface is uneven.

Ensure cables are fed through the 25mm exit point before fully adhering the plate. If multiple thick cables are being used, ensure they are bundled neatly to fit through the cavity and exit.