Best current price£7.91from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£7.91Visit shop Polypipe Polymax Equal Tee 22Mm Max222 White
Visit shop
B&Q£39.19Visit shop B&Q - X10 Polymax Max222 22mm Pushfit Equal Tee White
Visit shop2 offers from £7.91 - £39.19
View price history by clicking the chart icon.
The Polypipe Polymax Equal Tee (MAX222) is designed for plumbing professionals and DIY enthusiasts working on domestic hot and cold water and heating systems. Its key benefit is a fast, secure, and tool-demountable push-fit connection system that simplifies installations, especially in surface-mounted applications. A key caveat to remember is that it is not suitable for gas transportation or systems with high chlorine concentrations.
| Model Part Number | MAX222 |
|---|---|
| Brand | Polypipe |
The PolyMax Equal Tee is designed to be used with Polypipe White Polybutylene flexible pipe. It is recommended to use Polypipe metal or plastic pipe stiffeners for secure connections.
No, the PolyMax fittings are not suitable for the transportation of gases.
While specific temperature limits are not provided, PolyMax fittings are suitable for hot water and heating systems in domestic properties, implying they can handle typical temperatures for these applications.
Ensure the pipe is cut squarely, insert a pipe stiffener, and push the pipe firmly and squarely into the fitting until fully engaged. A secure connection is indicated by the pipe being fully home.
Yes, the PolyMax fittings are tool-demountable and re-usable. Use a Polypipe release tool to disconnect the pipe.
If further lubrication is required, only use Polypipe silicone lubricant. Do not use any other substances, such as solder flux, as they can damage the seal.
Yes, it is suitable for use in both hard and soft water areas. However, it is not suitable for systems with a high concentration of chlorine.
Ensure the pipe is cut square and clean. Verify that a Polypipe pipe stiffener is correctly inserted into the pipe end. Push the pipe firmly and squarely into the fitting.
Disconnect the pipe and fitting. Check the 'O' ring for damage or debris. Ensure the pipe end is fully inserted and the fitting is properly engaged. Reconnect firmly.
Ensure you are using a correct Polypipe release tool. Make sure the tool is fully engaged with the fitting's release mechanism before pulling the pipe.
Verify that the pipe stiffener is used and properly seated. Check that the pipe has been pushed fully into the fitting, past the internal grab ring.
Setup:
Compatibility:
Care:
